No powerrR?????
Login | |
|
No powerrR????? - 5/29/2008 6:32:01 PM
|
|
|
cafefighterscott
Posts: 39
Joined: 8/6/2007 Status: offline
|
So I have been spending the last few weeks getting this bike road ready... its all set, I just got a new chain and sprocket kit , the 520 conversion from sumofallparts, all the lights work, its insured , and its plated. so I finally finsihed the chian and sprocket thing and decided to take it for a spin tonight... its got like no power???? I rev it all the way up and the motor has the rpms but nothing to boot. My bro was on our 88 honda vtr250 and it was blowing me away, not once did it even come close to feeling like the front wheel was going to come off the ground. I talked to the kid who owned it before me tonight, toi ask him about what mods were done to it, he said it was ported and milled, had a jett kit, and the yoshi exhaust. I was expecting it to rip my arms out... I got nothing , any suggestions???
|
|
|
|
|
|
RE: No powerrR????? - 5/29/2008 6:39:20 PM
|
|
|
grindpunk16
Posts: 89
Joined: 5/7/2007 Status: offline
|
was it fightered before or no?
|
|
|
|
RE: No powerrR????? - 5/29/2008 6:44:47 PM
|
|
|
cafefighterscott
Posts: 39
Joined: 8/6/2007 Status: offline
|
no i fightered it, but i never messed with any thing engine wiser other than the idle screw to get it idleing right
|
|
|
|
RE: No powerrR????? - 5/29/2008 6:50:49 PM
|
|
|
grindpunk16
Posts: 89
Joined: 5/7/2007 Status: offline
|
when you let it idle can you crack the throttle and it rev clean
|
|
|
|
RE: No powerrR????? - 5/29/2008 6:55:18 PM
|
|
|
cafefighterscott
Posts: 39
Joined: 8/6/2007 Status: offline
|
yepp it revs right up. i just wish i knew some one near me that had one so i could comqare it
|
|
|
|
|
|
RE: No powerrR????? - 5/29/2008 7:03:02 PM
|
|
|
grindpunk16
Posts: 89
Joined: 5/7/2007 Status: offline
|
sirr1 did it (durr) i did it the one kid with the rat fighter on custom did it. either that or cover the holes
|
|
|
|
RE: No powerrR????? - 6/5/2008 4:16:41 PM
|
|
|
cafefighterscott
Posts: 39
Joined: 8/6/2007 Status: offline
|
i chopped down the intake tubes and I covered the holes on the frame, no change. it has plenty of rpms but no power, i am reallly gettin frustrated on this one. some times when I really whale on it then back down it back fires, does this tell me anything? I really dont want to take apart the carbs but I guess I will have too???
|
|
|
|
RE: No powerrR????? - 6/6/2008 4:32:24 PM
|
|
|
Micah
Posts: 9
Joined: 12/30/2007 Status: offline
|
mine lost all its power today to and it got a louder low rumbel not the clean sound i esualy get. I took it home and checked the inatake, emptied the feul filter and shook a bit of crap out of it reajusted the choke (below the tank) and cleaned the plugs. It fired right up and is working as smooth and if not better than it was before. try the same it might help ya out. I dont know why it worked lol
|
|
|
|
RE: No powerrR????? - 7/14/2008 1:29:51 PM
|
|
|
thrasher572
Posts: 200
Joined: 1/5/2008 From: Alberta,Canada. Status: offline
|
I bought an 88 for parts... when I got it home it would hardly run. I took the tank off and to my surprise the whole airbox was stuffed full of dog food and mouse turds. After a thourough cleaning it did start... with a bang. There was also dog food and turds in the exhaust. It blasted out and left a hugh stain on the wall behind the bike...
|
|
|
|
RE: No powerrR????? - 7/14/2008 2:33:22 PM
|
|
|
tds94probe
Posts: 208
Joined: 10/18/2007 Status: offline
|
sounds like your clutch is slipping to me, is it adjusted properly?
|
|
|
|
RE: No powerrR????? - 7/15/2008 8:51:51 PM
|
|
|
Billistic
Posts: 131
Joined: 9/20/2007 From: Denver, CO Status: offline
|
quote:
ORIGINAL: thrasher572 I bought an 88 for parts... when I got it home it would hardly run. I took the tank off and to my surprise the whole airbox was stuffed full of dog food and mouse turds. After a thourough cleaning it did start... with a bang. There was also dog food and turds in the exhaust. It blasted out and left a hugh stain on the wall behind the bike... That''s just too funny!
_____________________________
Speed limit....... what speed limit ??!!!! 1988 Hurricane 600 Dynojet carb kit, K & N filter, F1 pipe Pirelli Sport Demon 150/70/17 rear, 110/70/17 front -1 front sprocket, +2 rear sprocket
|
|
|
|
RE: No powerrR????? - 7/17/2008 8:29:05 AM
|
|
|
thrasher572
Posts: 200
Joined: 1/5/2008 From: Alberta,Canada. Status: offline
|
You indicated there was a chain and sprocket conversion kit... How many teeth front and rear?
|
|
|
|
RE: No powerrR????? - 7/17/2008 8:54:44 PM
|
|
|
thrasher572
Posts: 200
Joined: 1/5/2008 From: Alberta,Canada. Status: offline
|
It took 30 minutes of hard scrubbing and pressure washing to get all the turds off the siding... After the "obstruction" was removed from the exhaust it seemed to make better power...Although the exhaust odor was reminicent of mickey and pluto getting napalmed.
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
About Us |
Archive |
Honda CBR Motorcycle Links |
Legal |
Privacy Policy |
© CBR Forum
CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.
|