06 cbr600 FE, with light problem? (Full Version)

CBR >> Current Honda CBR Models >> 600 Modifications

06 cbr600 FE, with light problem?

  

sXe805 -> 06 cbr600 FE, with light problem? (5/30/2008 11:07:46 PM)

Alright, so this is my DIY FE, I used the original bracket from the fender and bent it into the shape you see VVVVV and got a hose clamp for 1.99, worked wonderful and very very strong(stronger than i thought)

So i got some lights from 1tail.com, called Titelights or something, and well when i intalled them only one worked!
i checked them out before i intalled and all thought out the install and they worked, but i think i might have burnt it because during the install i turned then on with it no being grounded and popped a circit...
any idea what happened?
Eh?
BTW, 06 CBR600rr

here is my army of pictures

[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3352.jpg[/image]
[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3353.jpg[/image]
[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3354.jpg[/image]
[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3358.jpg[/image]
[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3361.jpg[/image]
[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3362.jpg[/image]
[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3364.jpg[/image]
[image]http://i100.photobucket.com/albums/m2/ScottiePants/DSCF3365.jpg[/image]

  
Wakcbr -> RE: 06 cbr600 FE, with light problem? (6/25/2008 1:08:33 AM)

First of all, if it''s LED, you may have to get a whole new kit.  Make sure that clamp didn''t cut into the wirings cause that may give an extra ground raising the amperage which can blow a the lights.   But turning it on without a ground should not have blown the lights.  No ground, no complete circuit.  No complete circuit, no current flow. 

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.