06 cbr600 FE, with light problem?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

06 cbr600 FE, with light problem?

Printable Version

CBR Forums >> Current Honda CBR Models >> 600 Modifications >> 06 cbr600 FE, with light problem?

Page: [1]

Message

<< Older Topic Newer Topic >>

06 cbr600 FE, with light problem? - 5/30/2008 11:07:46 PM

sXe805

Posts: 6
Joined: 5/26/2008
Status: offline

Alright, so this is my DIY FE, I used the original bracket from the fender and bent it into the shape you see VVVVV and got a hose clamp for 1.99, worked wonderful and very very strong(stronger than i thought)

So i got some lights from 1tail.com, called Titelights or something, and well when i intalled them only one worked!
i checked them out before i intalled and all thought out the install and they worked, but i think i might have burnt it because during the install i turned then on with it no being grounded and popped a circit...
any idea what happened?
Eh?
BTW, 06 CBR600rr

here is my army of pictures

Post #: 1

RE: 06 cbr600 FE, with light problem? - 6/25/2008 1:08:33 AM

Wakcbr

Posts: 21
Joined: 6/25/2008
Status: offline

First of all, if it''s LED, you may have to get a whole new kit. Make sure that clamp didn''t cut into the wirings cause that may give an extra ground raising the amperage which can blow a the lights. But turning it on without a ground should not have blown the lights. No ground, no complete circuit. No complete circuit, no current flow.

(in reply to sXe805)

Post #: 2