engines dies when put in to gear

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

engines dies when put in to gear

Printable Version

CBR >> General >> General Tech >> engines dies when put in to gear

Page: [1]

Message

<< Older Topic Newer Topic >>

engines dies when put in to gear - 6/10/2008 11:58:08 PM

stuffum07

Posts: 4
Joined: 6/10/2008
Status: offline

iv got a 1999 cbr 600 f4 and runs fine but soon as you put it into gear it stalls what would be my problem

Post #: 1

RE: engines dies when put in to gear - 6/11/2008 1:06:58 AM

pacemaker

Posts: 1833
Joined: 7/18/2006
From: Newcastle, N.S.W. Australia
Status: offline

I suspect you have your side stand still down, it has a cut out, won''''t start till stand is retracted.
If not the case then the cut out switch may be faulty.

< Message edited by pacemaker -- 6/11/2008 1:16:04 AM >

_____________________________

"Beer makes you feel the way you ought to feel without Beer" ~ Henry Lawson

(in reply to stuffum07)

Post #: 2

RE: engines dies when put in to gear - 6/11/2008 2:32:07 AM

fishfryer527

Posts: 3684
Joined: 12/5/2005
From: Indian Harbor Beach, Florida
Status: offline

side stand switch.

or

Does anyone know if there is a switch or sensor in the tranny that talks to the motor that tells it whether of not the bike is in neutral?

_____________________________

Best Thread ever!
http://www.cbrforum.com/m_310096/tm.htm

This may be my new nomination for Best Thread Ever
http://www.cbrforum.com/m_664161/tm.htm

(in reply to pacemaker)

Post #: 3

RE: engines dies when put in to gear - 6/11/2008 3:54:02 AM

jDeArMeAmNy4

Posts: 116
Joined: 4/19/2008
Status: offline

did you pull in the clutch. i wouldnt recommend clutchless shifts into first when your stoped :-)

(in reply to fishfryer527)

Post #: 4

RE: engines dies when put in to gear - 6/11/2008 5:45:58 AM

redzintimidator

Posts: 1913
Joined: 8/6/2007
From: Greene, NY
Status: offline

is your clutch adjusted properly? On my dirt bike it was still grabbing a little at full clutch and stalled sometimes when shifting at a stop.

_____________________________

OKIEZAC - CBRforum buddy
schfigity-schwelve

(in reply to jDeArMeAmNy4)

Post #: 5

RE: engines dies when put in to gear - 6/11/2008 11:59:59 AM

bdphap

Posts: 90
Joined: 2/12/2008
Status: offline

If it jerks when it stalls it may be the neutral saftey switch(maybe called something diff.) if no jerking almost sure side stand switch.

_____________________________

STUPID HURTS!!!!!!!!!!!

(in reply to redzintimidator)

Post #: 6