turn signals

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

turn signals

Printable Version

CBR Forum >> Past CBR Models >> CBR 600F4 >> turn signals

Page: [1]

Message

<< Older Topic Newer Topic >>

turn signals - 6/18/2008 3:36:03 PM

mattmejean

Posts: 2
Joined: 6/18/2008
Status: offline

i am about to purchase a 2000 cbr600f4 well there are a couple problems first the turnsignals are broke off. and i can not find a site that says they have any that fit an f4 anyone know where i can get some. second i think the turn signal relay is fried because the battery had a dead short in it so the only way it would run is with a charger hooked up. when i tried the rear signals it made all kinds of noise(the relay) so is it the relay or just because of the charger? if it is the realy where can i get one

Post #: 1

RE: turn signals - 6/19/2008 6:05:32 AM

mauthman

Posts: 212
Joined: 10/18/2007
Status: offline

turn signals are extremely easy to find. if that is the only thing wrong then go for it. Tonnes are listed on ebay so check there. I got flushmounts for 20$ and haven''t had any problems so far. There will also be relays on there too.. best place to look

_____________________________

(in reply to mattmejean)

Post #: 2

RE: turn signals - 6/19/2008 7:09:49 AM

PlayfulGod

Posts: 3737
Joined: 6/9/2007
From: Dalton, GA
Status: offline

+1 on ebay. Mine were only $20 and havent had issue one with them. They are just turn signals tho, I have the dodads to make running lights too but I like em like they are.

_____________________________

For All your Hosting Needs, TechyGeek.com

SBG
PC Gamer Tag: The_Plague

(in reply to mauthman)

Post #: 3

RE: turn signals - 6/19/2008 7:18:43 AM

N8 Dawg

Posts: 1737
Joined: 7/18/2006
From: Middletown OH
Status: offline

Most flush mounts are universal, mine I just had to cut the fairing where the two holes were and just make it one hole. you can buy the ones for your model that require no cutting but I figured I was never going back to the HUGE stock turn signals. as far as the relay making a bunch of noise...could be since there are no front turn signals the wires might be touching and causing a short...I would look at it when you install new turn signals and you should be able to figure it out.

and playfulgod whats dodads? are you talking about a diode?

_____________________________

(in reply to PlayfulGod)

Post #: 4

RE: turn signals - 6/19/2008 7:22:47 AM

PlayfulGod

Posts: 3737
Joined: 6/9/2007
From: Dalton, GA
Status: offline

quote:

ORIGINAL: N8 Dawg

Most flush mounts are universal, mine I just had to cut the fairing where the two holes were and just make it one hole. you can buy the ones for your model that require no cutting but I figured I was never going back to the HUGE stock turn signals. as far as the relay making a bunch of noise...could be since there are no front turn signals the wires might be touching and causing a short...I would look at it when you install new turn signals and you should be able to figure it out.

and playfulgod whats dodads? are you talking about a diode?

yea, that be them lol. Knew what they were but was having a brain fart

_____________________________

For All your Hosting Needs, TechyGeek.com

SBG
PC Gamer Tag: The_Plague

(in reply to N8 Dawg)

Post #: 5