What in tank carb cleaner do you use? (Full Version)

CBR Forums >> Past CBR Models >> CBR 600F

What in tank carb cleaner do you use?

  

Juggalo_X -> What in tank carb cleaner do you use? (6/19/2008 8:27:03 AM)

i had my bike in the shop they didnt pull the carbs and clean them cuz they are not that bad. said an intank claner will fix them up for me.

i usualy use SeaFoam on my Mustang as wel las my Neon and Tarus. I want to use this on the CBR too.

question is do you reccomend something els?

  
lonewolfcbr -> RE: What in tank carb cleaner do you use? (6/19/2008 9:03:44 AM)

seamfoam works good....but its not a miracle worker...best way to clean carbs is to take them apart...

Juggalo_X -> RE: What in tank carb cleaner do you use? (6/19/2008 9:15:25 AM)

thanks, and i realize that. but the place i tok it to said there is no need to pull the carbs they look good just a lil bit of deposit in them that a in tank cleaner would clear up.

lonewolfcbr -> RE: What in tank carb cleaner do you use? (6/19/2008 9:16:44 AM)

Yah then you will be ok with seafoam...i used it in my bike and it did some good..i still have a few problems....i also used it in my neon....worked for a tank or two...then my injectors shit the bed and i would get 140 miles to tank...lol 

Juggalo_X -> RE: What in tank carb cleaner do you use? (6/19/2008 9:20:37 AM)

quote:

ORIGINAL: lonewolfcbr

Yah then you will be ok with seafoam...i used it in my bike and it did some good..i still have a few problems....i also used it in my neon....worked for a tank or two...then my injectors shit the bed and i would get 140 miles to tank...lol 
[:-] thats worse millage then my mustang LOL

dalex -> RE: What in tank carb cleaner do you use? (6/19/2008 6:53:38 PM)

How can they tell your carbs look good and are clean if they didn''t take them apart? That''s just BS. Until you don''t take them out, open the float chambers, take out the jets and look through them, there''s no way of being 100% positive that there are no excessive deposits...


quote:


thanks, and i realize that. but the place i tok it to said there is no need to pull the carbs they look good just a lil bit of deposit in them that a in tank cleaner would clear up.

Juggalo_X -> RE: What in tank carb cleaner do you use? (6/20/2008 6:47:25 AM)

quote:

ORIGINAL: dalex

How can they tell your carbs look good and are clean if they didn''''t take them apart? That''''s just BS. Until you don''''t take them out, open the float chambers, take out the jets and look through them, there''''s no way of being 100% positive that there are no excessive deposits...


I dont know, i dont do much if anything on bikes. however they were correct a lil seafoam and not it runs perfectly it seemes.

so no harm no foul either way.

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.