HELP, parts are here.

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

HELP, parts are here.

Printable Version

CBR Forums >> Current Honda CBR Models >> 1000 Modifications >> HELP, parts are here.

Page: [1]

Message

<< Older Topic Newer Topic >>

HELP, parts are here. - 6/20/2008 1:01:35 PM

BigCountryBllr

Posts: 27
Joined: 5/3/2008
Status: offline

I have an 05 CBR100rr. STOCK!

I just got hot bodies flush mount front turning signals, and LED intergrated tailight, and licence plate bracket with lights(mounts under battery tray)

Will i be able to do this myself? Any special tools needed? I saw a video on "Youtube" and someone used sodder..
Am i going to need extra resistors to slow down the blinking speed?

Any tips?.. I really hope i dont mess anything up...

Post #: 1

RE: HELP, parts are here. - 6/20/2008 3:38:12 PM

Onarom

Posts: 1201
Joined: 8/29/2006
Status: offline

You can do it by yourself. The solder isn''t needed, it is just a more permanent way to ensure your wires are connected.

You don''t need to slow down your blinking rate unless you really want to. Personally, I kind of like mine blinking faster.

If you can, I would use heat shrink instead of electrical tape. You should be able to find some at about any hardware store.

If you mess up, you will probably only blow a fuse. Just read the instructions first and you should be fine!

Oh yea- TAKE YOUR TIME- don''t be in a hurry. That is my best tip for you.

_____________________________