Trans Swap (Full Version)

CBR Forum >> General >> General Tech

Trans Swap

Mike2609 -> Trans Swap (6/23/2008 7:36:58 PM)
I''m probably buying my buddy''s 96 900rr. It has the typical jumping out of 2nd problem. I''m mechanically "inclined" but not mechanically experienced. The bike comes with a spare tranny with less milage than the bike (i think 14k). Anyway, i’ve looked for info on whats involved with pulling the tranny, cant find it really. I hear that I can do it without pulling the motor. True? I don’t have the manual in front of me right now, so just looking for a little help. My plan is to do the swap and rebuild the original and keep it on hand. Thanks!

Mike2609 -> RE: Trans Swap (6/24/2008 5:09:26 PM)
Come on fellas. You guys know this one. Help a brother out. Trying to get this project underway. Thanks

justasquid -> RE: Trans Swap (6/24/2008 10:16:45 PM)
As far as I know, you have to split the engine case to get to the transmission. So, you have to pull the engine out of the bike. I know the newer cbr 1000RR''s utilize a transmission that can be removed from the side of the engine, but I don''t think they started that until 04.

HondaTech68 -> RE: Trans Swap (6/25/2008 4:29:28 PM)
engine pulled left and right covers clutch removed oil pump removed stator and split bottom half from the top its a pretty big job

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.