Mototeck undertail (Full Version)

CBR >> Past CBR Models >> CBR 929RR

Mototeck undertail

  

Wong -> Mototeck undertail (6/25/2008 8:16:51 AM)

I''d like to purchase an aftermarket undertail for my 929 Blade. So I found Mototeck undertails...
Does anyone have such staff? I just want to see some examples before I buy it. I''ve only found these pics with it.

[image]http://www.rackinmotion.com/images/P/7104100-01.jpg[/image]

[image]http://keep4u.ru/imgs/b/080625/9c/9cc951e1ccbc48b272.jpg[/image]

  
skubysnak -> RE: Mototeck undertail (6/25/2008 1:07:22 PM)

Nice tail.  I''ve got a Texas Fairing tail that uses the stock tail light...

mikey1297 -> RE: Mototeck undertail (6/26/2008 2:58:23 AM)

i have a hotbodies they fit pretty good mine uses the stock light

Wong -> RE: Mototeck undertail (6/26/2008 3:09:14 AM)

Ok. Even if I install a Hotbodies undertail and a Clear Alternative''s LED taillight, what can I do with the licence plate? I like ones which VFX makes for Yamaha''s R6 & R1.
http://www.vfxkits.com/c220672.2.html
Did anyone see pivot kits for 929? Or maybe I should look for their universal kit?

NY Erion929 -> RE: Mototeck undertail (6/26/2008 5:29:57 AM)

I have the eurobikes undertail and a custom plate bracket i made that mounts to the rear peg bolts (basically just a big L bracket)

[image]http://i14.photobucket.com/albums/a317/EGinNY/0.jpg[/image]



Wong -> RE: Mototeck undertail (6/26/2008 6:12:20 AM)

The most problem is that russian licence plates are a little bit bigger. I think it''s at least twice bigger than american... For blind cops? I don''t know..
So if I make brackets like that my plate will damage the tire...

[image]http://keep4u.ru/imgs/b/080626/71/710f70e3ef68a9e2b6.jpg[/image]

To avoid different unpleasant contacts with the cops I want to think out something that can flip under the tail. Maybe I''ll take VFX pivot kits as an example...

skubysnak -> RE: Mototeck undertail (6/26/2008 8:31:27 AM)

I stuck my plate sideways under the chain guard on the left side, just using the last bolt.  Most just jam their plate above the rear hugger.  You can find lots of aftermarket plate holders online.

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.