Mototeck undertail

Printable Version

CBR Forum >> Past CBR Models >> CBR 929RR >> Mototeck undertail

Page: [1]

Login Message << Older Topic   Newer Topic >>

Mototeck undertail - 6/25/2008 8:16:51 AM    Wong Posts: 27 Joined: 12/26/2007 From: Moscow, RUSSIA Status: offline I''d like to purchase an aftermarket undertail for my 929 Blade. So I found Mototeck undertails... Does anyone have such staff? I just want to see some examples before I buy it. I''ve only found these pics with it. < Message edited by Wong -- 6/25/2008 1:32:25 PM > _____________________________ 2001 CBR929RR European Micron CF bolt-on K&N filter DynoJet Power Commander III usb Spiegler braided lines front and rear Brembo 19x20 Billet Radial Master Cylinder CRG clutch lever Rizoma Turn Signals 4300K HID low beam Post #: 1

RE: Mototeck undertail - 6/25/2008 1:07:22 PM    skubysnak   Posts: 270 Joined: 4/21/2007 Status: offline Nice tail.  I''ve got a Texas Fairing tail that uses the stock tail light... (in reply to Wong) Post #: 2

RE: Mototeck undertail - 6/26/2008 2:58:23 AM    mikey1297   Posts: 451 Joined: 4/24/2006 Status: offline i have a hotbodies they fit pretty good mine uses the stock light (in reply to skubysnak) Post #: 3

RE: Mototeck undertail - 6/26/2008 3:09:14 AM    Wong Posts: 27 Joined: 12/26/2007 From: Moscow, RUSSIA Status: offline Ok. Even if I install a Hotbodies undertail and a Clear Alternative''s LED taillight, what can I do with the licence plate? I like ones which VFX makes for Yamaha''s R6 & R1. http://www.vfxkits.com/c220672.2.html Did anyone see pivot kits for 929? Or maybe I should look for their universal kit? _____________________________ 2001 CBR929RR European Micron CF bolt-on K&N filter DynoJet Power Commander III usb Spiegler braided lines front and rear Brembo 19x20 Billet Radial Master Cylinder CRG clutch lever Rizoma Turn Signals 4300K HID low beam (in reply to mikey1297) Post #: 4

RE: Mototeck undertail - 6/26/2008 5:29:57 AM    NY Erion929 Posts: 1523 Joined: 9/29/2006 Status: online I have the eurobikes undertail and a custom plate bracket i made that mounts to the rear peg bolts (basically just a big L bracket) _____________________________ Ride Like You Want To Ride Tomorrow ''01 929RR - Daily Rider ''03 954RR - StuntFighter ''97 Yamaha Waverunner (in reply to Wong) Post #: 5

RE: Mototeck undertail - 6/26/2008 6:12:20 AM    Wong Posts: 27 Joined: 12/26/2007 From: Moscow, RUSSIA Status: offline The most problem is that russian licence plates are a little bit bigger. I think it''s at least twice bigger than american... For blind cops? I don''t know.. So if I make brackets like that my plate will damage the tire... To avoid different unpleasant contacts with the cops I want to think out something that can flip under the tail. Maybe I''ll take VFX pivot kits as an example... < Message edited by Wong -- 6/26/2008 6:41:51 AM > _____________________________ 2001 CBR929RR European Micron CF bolt-on K&N filter DynoJet Power Commander III usb Spiegler braided lines front and rear Brembo 19x20 Billet Radial Master Cylinder CRG clutch lever Rizoma Turn Signals 4300K HID low beam (in reply to NY Erion929) Post #: 6

RE: Mototeck undertail - 6/26/2008 8:31:27 AM    skubysnak   Posts: 270 Joined: 4/21/2007 Status: offline I stuck my plate sideways under the chain guard on the left side, just using the last bolt.  Most just jam their plate above the rear hugger.  You can find lots of aftermarket plate holders online. (in reply to Wong) Post #: 7

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 6230 doncollins 6225 tahoe sc 5797 pitsvtec 5316 rrasco 4874 d2dgraphix_6 4673 blue fox 4264 vpsophmore 4178 havoc 4004 chainstretch 3926

New Vendors
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.