Can Someone Post a Pic of their Lock (Full Version)

CBR Forums >> Current Honda CBR Models >> CBR 600F4i

Can Someone Post a Pic of their Lock

  

F4itanner -> Can Someone Post a Pic of their Lock (6/25/2008 9:06:58 AM)

I just installed a Pimpbike Undertail which I think looks amazing.  Anyway...  I cant figure out how I should remount the lock.  So if someone has some detailed pictures of how they remounted their lock, I would greatly apprieciate it.

  
whtan20 -> RE: Can Someone Post a Pic of their Lock (6/25/2008 12:52:08 PM)

Might need this too later on.  Someone come through with the help!

bakesf4i -> RE: Can Someone Post a Pic of their Lock (6/25/2008 4:02:58 PM)

Didnt the undertail come with the pre drilled hole?

PlayfulGod -> RE: Can Someone Post a Pic of their Lock (6/25/2008 4:27:22 PM)

mines located behind where I placed the tag bracket which is just back for the raise for the taillight.

iRIDE -> RE: Can Someone Post a Pic of their Lock (6/25/2008 6:37:58 PM)

I hope this helps. Please excuse the dirt.

[image]http://img.photobucket.com/albums/v51/shamain/DSC01283.jpg[/image]

PlayfulGod -> RE: Can Someone Post a Pic of their Lock (6/25/2008 6:39:38 PM)

quote:

ORIGINAL: iRIDE

I hope this helps. Please excuse the dirt.

[image]http://img.photobucket.com/albums/v51/shamain/DSC01283.jpg[/image]
yea mines in about the same place but centered. Thanks for the pic Dev I was too lazy to go take one lol.

F4Isvt -> RE: Can Someone Post a Pic of their Lock (6/25/2008 7:30:25 PM)

?Have to thread jack for just a sec. Why does everyone say excuse the dirt? That is not dirty at all. I have not washed mine since the season started. I find myself wanting to wash it but just riding instead.

whtan20 -> RE: Can Someone Post a Pic of their Lock (6/25/2008 11:41:17 PM)

Could someone post a picture of the locking mechanism?

iRIDE -> RE: Can Someone Post a Pic of their Lock (6/26/2008 4:19:20 AM)

quote:

ORIGINAL: F4Isvt

?Have to thread jack for just a sec. Why does everyone say excuse the dirt? That is not dirty at all. I have not washed mine since the season started. I find myself wanting to wash it but just riding instead.


It''s not really dirty, but the undertail had mud and dirt.  Its looked a lot worse than the picture showed.

quote:

ORIGINAL: whtan20

Could someone post a picture of the locking mechanism?


Here is a photo of my locking mech.  Its a crude little setup, but it works.  I used a screw and screwed the triangular piece (dont know what its called) to the right side of my tray.  I got frustrated after a while and didnt know what else to do with it and came up with this setup.  It has worked perfectly since installed.

[image]http://img.photobucket.com/albums/v51/shamain/2.jpg[/image]

CBR Time -> RE: Can Someone Post a Pic of their Lock (6/26/2008 8:16:53 AM)

ill try and snap a few shots for ya[;)]

Rennen -> RE: Can Someone Post a Pic of their Lock (6/26/2008 8:32:05 AM)

my locking mechanism [:D]
[image]http://photos-c.ak.facebook.com/photos-ak-sf2p/v285/106/67/2036906/n2036906_48158930_9443.jpg[/image]
[image]http://photos-d.ak.facebook.com/photos-ak-sf2p/v285/106/67/2036906/n2036906_48158931_9758.jpg[/image]

iRIDE -> RE: Can Someone Post a Pic of their Lock (6/26/2008 8:55:23 AM)

Hey Rennen, does yours work by remote?  That looks a lot like the aftermarket actuators that I added to my Colorado.

F4itanner -> RE: Can Someone Post a Pic of their Lock (6/26/2008 1:25:45 PM)

Yeah I have a pre drilled hole for the lock.  When I was taking it all out the spring and stuff popped out and I dont know how it all goes back together.  That and I really didnt pay a whole lot of attention while taking it apart.

Rennen -> RE: Can Someone Post a Pic of their Lock (6/26/2008 3:48:45 PM)


quote:

ORIGINAL: iRIDE

Hey Rennen, does yours work by remote?  That looks a lot like the aftermarket actuators that I added to my Colorado.


i just put a momentary switch on the bottom of the undertail. when i got the bike, it didnt have a lock to open the truck, there was just a cord you pulled on to open it. anyone could open it, so i got a power lock actuator and wired it up to the tail light so that it can only be opened when the key is in the ignition.

bakesf4i -> RE: Can Someone Post a Pic of their Lock (6/27/2008 12:47:38 PM)

quote:

ORIGINAL: iRIDE

Here is a photo of my locking mech.  Its a crude little setup, but it works.  I used a screw and screwed the triangular piece (dont know what its called) to the right side of my tray.  I got frustrated after a while and didnt know what else to do with it and came up with this setup.  It has worked perfectly since installed.

[image]http://img.photobucket.com/albums/v51/shamain/2.jpg[/image]


Thats exactly how mine looks, I have noticed that the seat does to get stuck some times and I have to give it a little tug for it to pop off.

  

Page: [1] 2   next >   >>

Return to CBR Forum home page or view the Full Version of this page.