Clutch plate replacement (Full Version)

CBR Forum >> Past CBR Models >> CBR 600F2

Clutch plate replacement

  

jason8887 -> Clutch plate replacement (6/26/2008 1:12:46 PM)

Hey guys, I need some advice on replacing my clutch plates.  I was told by my local dealer that I would want to replace the fiber plates and the steel plates if my clutch is slipping at all.  My plates do slip, but only if I am really riding hard, and only if I am in 3rd gear or higher, above 7500 rpm. 

I have never heard of a need to replace the steel plates when replacing clutch plates.  Anyone have any first hand experience with this?  I don''t want to spend any more $$ than needed.  Thanks

Jason

  
elmer -> RE: Clutch plate replacement (6/26/2008 5:55:32 PM)

I wouldn''t think you would need to replace the steels, but if it wasn''t cost prohibitive I probably would.  I would definitely replace the clutch springs too.  I''d almost argue that you could replace the clutch springs and it could be all you need.  Of course, if your fibers are shot then there''s no way around it.

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.