''07 CBR1000RR

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

''07 CBR1000RR

Printable Version

CBR Forums >> Current Honda CBR Models >> CBR 1000RR >> ''07 CBR1000RR

Page: [1]

Message

<< Older Topic Newer Topic >>

''07 CBR1000RR - 6/27/2008 8:29:27 AM

oilheadron

Posts: 2
Joined: 6/27/2008
Status: offline

A customer of ours put a Yosh slipon (RS-5) on his otherwise stock bike and picked up an immediate bad surge/misfire/whatever you want to call it between roughly 2500 and 3200 rpms. After 3200 it screams as expected. It has a PCIII USB; mapping the fuel RADICALLY in both directions does NOTHING to smooth it out between 2500 and 3200. Unplugging the flapper servo motor didn''t do anything except throw an FI light. We encountered a CBR600RR some time ago that reacted the same way (that was a Dunlop-owned tire test bike and the Honda guys at the Dunlop facility didn''t have a clue either). WTF???

P.S. The exhaust butterflies were eliminated when the system on the 1000RR was installed (can''t remember for sure about the 600RR). A message with Yosh tech support went unanswered. HELP!!!!!!!!!!!!!!

Post #: 1

RE: ''''07 CBR1000RR - 6/27/2008 2:32:11 PM

MgA_ODEN

2005 Ride Of
The Year
Posts: 2056
Joined: 4/19/2005
From: Spring , Tx
Status: online

Sounds like a bad map , try getting one from here > http://www.1000rr.net/forums/showthread.php?t=8937

_____________________________

Black 2004 CBR1000RR

(in reply to oilheadron)

Post #: 2

RE: ''''''''07 CBR1000RR - 7/1/2008 2:27:24 PM

oilheadron

Posts: 2
Joined: 6/27/2008
Status: offline

Thanks. We''ll give that a shot.

Ron

(in reply to MgA_ODEN)

Post #: 3

RE: ''''''''''''''''07 CBR1000RR - 7/2/2008 1:37:21 PM

justasquid

Posts: 255
Joined: 4/21/2008
Status: offline

you could try and remove the PC3 and just run the factory computer. See if it clears up. Then you know its either a bad map or the PC3 itself. ALso, the PC3 may just not be taking the new map for some reason.

On a side note, you can run a slip-on without a PC3. The factory computer is good enough for just a slipon.

(in reply to oilheadron)

Post #: 4

RE: ''''''''''''''''''''''''''''''''07 CBR1000RR - 7/2/2008 4:46:44 PM

dustintp

Posts: 33
Joined: 8/23/2007
Status: offline

I think it sounds like a bad map

(in reply to justasquid)

Post #: 5