600RR Swingarm Width (Full Version)

CBR Forums >> Current Honda CBR Models >> CBR 600RR

600RR Swingarm Width

  

swiest152 -> 600RR Swingarm Width (6/27/2008 4:02:16 PM)

Does anyone know what the pivot width of the 600rr swingarm?   I tried searching but nothing came up that I needed.

Not sure if this should be posted in this board or the mod board.

thanks,
sw


  
swiest152 -> RE: 600RR Swingarm Width (6/27/2008 9:15:01 PM)

Also, what is the diameter of the swingarm Bolt?

from what I saw in the RR swingarm to f4 conversion thread, the RR SA and F4 SA are the same width?

PlayfulGod -> RE: 600RR Swingarm Width (6/27/2008 9:21:10 PM)

they are the same width n same bolt dia. The RR uses a larger axle tho, so you will have to either make bushings for the F4/i axle or find bearings that fit the F4/i wheel and the rr axle. Will also need a 1000RR shock, flip the upper shock mount and grind it so it fits.

swiest152 -> RE: 600RR Swingarm Width (6/28/2008 7:45:39 AM)

Im not looking to put the RR swingarm on a f4.  My friend has a f4, so I was just checking to see if I could use that to measure the width on the f4 to get the RR width.

Thanks for your response.

swiest152 -> RE: 600RR Swingarm Width (6/28/2008 5:27:50 PM)

How does the width of the 03-04 RR swingarm compare to the 05+ rr swingarm? 

PlayfulGod -> RE: 600RR Swingarm Width (6/28/2008 5:52:24 PM)

quote:

ORIGINAL: swiest152

How does the width of the 03-04 RR swingarm compare to the 05+ rr swingarm? 
think they are the same. the upper shock mount is casted in with the rest is the biggest difference I think.

swiest152 -> RE: 600RR Swingarm Width (6/28/2008 7:25:03 PM)

quote:

ORIGINAL: PlayfulGod

quote:

ORIGINAL: swiest152

How does the width of the 03-04 RR swingarm compare to the 05+ rr swingarm? 
think they are the same. the upper shock mount is casted in with the rest is the biggest difference I think.



03-04 pivot bolt goes through the engine, frame and swingarm where as the 05+ only goes through swingarm and frame.   I dont know if all the RR frames are the same.


  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.