600RR Swingarm Width

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

600RR Swingarm Width

Printable Version

CBR Forum >> Current Honda CBR Models >> CBR 600RR >> 600RR Swingarm Width

Page: [1]

Message

<< Older Topic Newer Topic >>

600RR Swingarm Width - 6/27/2008 4:02:16 PM

swiest152

Posts: 5
Joined: 6/27/2008
Status: offline

Does anyone know what the pivot width of the 600rr swingarm? I tried searching but nothing came up that I needed.

Not sure if this should be posted in this board or the mod board.

thanks,
sw

< Message edited by swiest152 -- 6/27/2008 4:55:53 PM >

Post #: 1

RE: 600RR Swingarm Width - 6/27/2008 9:15:01 PM

swiest152

Posts: 5
Joined: 6/27/2008
Status: offline

Also, what is the diameter of the swingarm Bolt?

from what I saw in the RR swingarm to f4 conversion thread, the RR SA and F4 SA are the same width?

(in reply to swiest152)

Post #: 2

RE: 600RR Swingarm Width - 6/27/2008 9:21:10 PM

PlayfulGod

Posts: 2996
Joined: 6/9/2007
From: Dalton, GA
Status: offline

they are the same width n same bolt dia. The RR uses a larger axle tho, so you will have to either make bushings for the F4/i axle or find bearings that fit the F4/i wheel and the rr axle. Will also need a 1000RR shock, flip the upper shock mount and grind it so it fits.

_____________________________

For All your Hosting Needs, TechyGeek.com,
SBG

(in reply to swiest152)

Post #: 3

RE: 600RR Swingarm Width - 6/28/2008 7:45:39 AM

swiest152

Posts: 5
Joined: 6/27/2008
Status: offline

Im not looking to put the RR swingarm on a f4. My friend has a f4, so I was just checking to see if I could use that to measure the width on the f4 to get the RR width.

Thanks for your response.

(in reply to PlayfulGod)

Post #: 4

RE: 600RR Swingarm Width - 6/28/2008 5:27:50 PM

swiest152

Posts: 5
Joined: 6/27/2008
Status: offline

How does the width of the 03-04 RR swingarm compare to the 05+ rr swingarm?

(in reply to swiest152)

Post #: 5

RE: 600RR Swingarm Width - 6/28/2008 5:52:24 PM

PlayfulGod

Posts: 2996
Joined: 6/9/2007
From: Dalton, GA
Status: offline

quote:

ORIGINAL: swiest152

How does the width of the 03-04 RR swingarm compare to the 05+ rr swingarm?

think they are the same. the upper shock mount is casted in with the rest is the biggest difference I think.

_____________________________

For All your Hosting Needs, TechyGeek.com,
SBG

(in reply to swiest152)

Post #: 6

RE: 600RR Swingarm Width - 6/28/2008 7:25:03 PM

swiest152

Posts: 5
Joined: 6/27/2008
Status: offline

quote:

ORIGINAL: PlayfulGod

quote:

ORIGINAL: swiest152

How does the width of the 03-04 RR swingarm compare to the 05+ rr swingarm?

think they are the same. the upper shock mount is casted in with the rest is the biggest difference I think.

03-04 pivot bolt goes through the engine, frame and swingarm where as the 05+ only goes through swingarm and frame. I dont know if all the RR frames are the same.

(in reply to PlayfulGod)

Post #: 7