|
moldousa -> RE: K&N filter (6/29/2008 10:41:32 AM)
|
ok...i just did this 2 days ago on my 06 f4i...so
1-you''ll gonna need to take the front 2 bolts that hold your tank
2-you''ll going to need to take the seat off in on order to get to the other 2 tank bolts
3-take those 2 bolts off
4-lift your tank but carefully, because you have to disconect the IAT sensor that is on top of the air filter cover
5-once you disconect that,you will going to improvise in order to keep your tank opened: so you can either strap it from the front,lift it up and put the straps somewhere in the back of the bike, or put a can or something undernith your tank to hold it.
6-unscrew the bolts that hold the air cover,including the one in the middle.
7-remove your old air filter and install the new one(on the filter says wich side goes up)
8- do the reverse of what you did and your good to go
Also check this out:
http://www.shraz.net/motorcycle/f4i/airfilter/
|
|
|
|
