|
ciupe -> Look what this newbie did to my F4 (2/8/2006 9:38:47 PM)
|
This moron tried to change the air fiter on his 2000 CBR F4, and he fust it up. He figured, hey i can do this, after after all I do pump my own gas. He didn't notice the 10'th screw on the top of the ail box and just started yanking on it trying to get the air filter out. All of a sudden he hears some seals ripping and the whole air box comes off the bike. By the way, i was that moron. [sm=bangbang.gif] [image]http://members.cox.net/sandu2/bike/screw.jpg[/image] [image]http://members.cox.net/sandu2/bike/air1.gif[/image] Apparantly to chage the air filter you only have to take off the top part of the air filter box. I yanked on it so hard that the whole box came off. [image]http://members.cox.net/sandu2/bike/air2.gif[/image] So help me out you guys. I can put the box back, but i'm concerned about the seals. Look at this picture. There is sone sort of seal on the air holes on the bike. Those need to be replaced before i put the air box back right? [image]http://members.cox.net/sandu2/bike/air3.gif[/image] I always thought that magically the fuel in the gas tank found its way into the motor. I found out today that it drains thru a fragile hose. In the process of removing the gas tank i ripped that hose right in half. Did you guys know ther's a fuel off switch? I was like hell-yah!!! I did not want to hold my finger on the tube all day. The fuel tank has 3 hoses. 2 dont connect to anything, they just drain apparantly, but one of them connecs to a pump or something. I broke that one. [image]http://members.cox.net/sandu2/bike/fuel1.gif[/image] [image]http://members.cox.net/sandu2/bike/fuel2.gif[/image] I was looking thru bikebandit.com to find out which part it is, but i'm too dumb. Its about 5 inches, just a regular hose. I got the clamp that keeps it on. here's a diagram http://www.bikebandit.com/partsbandit/showschematic~dept_id~380101.asp You know wha the best part is? I did it so i could add a K & N air filter, cause its reusable. When i got it all apart, a K&N filter was already on the bike. Clean as ****, did not need to be washed. Any help would be appreciated. Thanx
|
|
|
|