Clicking Sound

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Clicking Sound

Printable Version

CBR Forum >> Past CBR Models >> CBR 929RR >> Clicking Sound

Page: [1]

Message

<< Older Topic Newer Topic >>

Clicking Sound - 6/29/2008 2:12:05 PM

SoILRida

Posts: 4
Joined: 5/16/2008
Status: offline

Hi Everyone, I am new to the site but not to riding. I have my 2nd Erion Racing and I have come to a problem that I have not had happen to me yet. I am looking for some help. So a few mths ago I tagged a guard rail (loose gravel) and cracked my stator cover. Being that I have never changed one I ordered it and replaced it myself. Well I rode it for about 2 weeks and noticed that it was leaking oil. So I had remembered from removing the old cover that there was no gasket. I just installed it not too long ago. I go to start the bike and nothing. When I press the start button all I hear is a loud click. None of the fuses blew because I checked them all. I am lost and a little frustrated. Anyone know how to help?

Post #: 1

RE: Clicking Sound - 6/29/2008 3:14:37 PM

bignibb

Posts: 678
Joined: 1/7/2007
Status: offline

do all your electronics work?
guage, lights, ect?

does the fuel pump prime?

did you try to pop the clutch?

did you try to jump start it?

I believe there is a gasket there from honda, its just very thin.

was it your bikes original stator in it?

(in reply to SoILRida)

Post #: 2

RE: Clicking Sound - 6/29/2008 3:23:56 PM

SoILRida

Posts: 4
Joined: 5/16/2008
Status: offline

All the lights work, the pump primes, and I installed a new gasket. Its just wierd, because all i did was remove the old cover, installed the new one and it ran fine. I noticed it was leaking oil so I removed the new cover and installed the gasket and now it won''t start. I haven''t jump started it yet, Because the battery had given me problems before. So I got a new one and still nothing so my next option was going to be pop the clutch. I wasn''t sure if that would help at all with the clicking sound.

(in reply to bignibb)

Post #: 3

RE: Clicking Sound - 7/1/2008 1:55:12 PM

SoILRida

Posts: 4
Joined: 5/16/2008
Status: offline

So yesterday I tried to pop the clutch and nothing happened. So I went online and found the fault codes. I tried and got no blinks at all. The oil light is still on though. I am lost.

(in reply to SoILRida)

Post #: 4

RE: Clicking Sound - 7/1/2008 9:13:24 PM

CROMAG

Posts: 72
Joined: 2/14/2006
Status: offline

You need to provide more info... any more info... What do you mean the oil light is on??? does it stay on??? do you hear the injectors prime??? is there any noise when you hit the starter switch.. check the starter relay??? check the fuse for starter (should maybe be one by or on the relay??) check ground?? check power to starter?? The thread says clicking????? when you put the gasket on were all the gears ok??? there is a small starter gear that pops out when I pull the stator cover off.... Sounds like maybe the starter seized and blew a fuse.....

(in reply to SoILRida)

Post #: 5