Two Bros Hi Mount + Pass. Pegs (Full Version)

CBR Forum >> Current Honda CBR Models >> CBR 600F4i

Two Bros Hi Mount + Pass. Pegs

  

whtan20 -> Two Bros Hi Mount + Pass. Pegs (6/29/2008 11:56:37 PM)

For those who have the two bros high mount or any other high mount exhaust that uses similar mounts how would i be able to keep my passenger pegs?  The exhaust is obstructing the placement of my passenger pegs and i''m not sure if it''s possible to have them on with this exhaust.

  
Maniak05 -> RE: Two Bros Hi Mount + Pass. Pegs (6/30/2008 5:13:00 AM)

I dont know of any F4i''s...but my buddy with an ''02 954RR just has a 2-3in spacer on the bracket holes.  It literally looks like a deep socket off a socket set.  And a longer bolt through the middle of course.

PlayfulGod -> RE: Two Bros Hi Mount + Pass. Pegs (6/30/2008 5:47:54 AM)

quote:

ORIGINAL: Maniak05

I dont know of any F4i''''s...but my buddy with an ''''02 954RR just has a 2-3in spacer on the bracket holes.  It literally looks like a deep socket off a socket set.  And a longer bolt through the middle of course.
^ purdy much the same dealio.

nuke79 -> RE: Two Bros Hi Mount + Pass. Pegs (6/30/2008 6:18:56 AM)

Go to a hardware store and get 8mm hex flat tip screws..  I searched EVERYWHERE, and finally found them at a Lowes.  8mm hex screw,  3in long.  Works perfect.  Need to find a hollow extension now to fill the gap between the peg and where it used to fit. 

whtan20 -> RE: Two Bros Hi Mount + Pass. Pegs (6/30/2008 12:31:28 PM)

quote:

ORIGINAL: nuke79

Go to a hardware store and get 8mm hex flat tip screws..  I searched EVERYWHERE, and finally found them at a Lowes.  8mm hex screw,  3in long.  Works perfect.  Need to find a hollow extension now to fill the gap between the peg and where it used to fit. 


Cool thanks, i''ll search for this.  What could you use to fill the gap? A bunch of shims?

scattabrain -> RE: Two Bros Hi Mount + Pass. Pegs (6/30/2008 1:10:11 PM)

I bought my bike with a high mount exhaust on it already so i don''t know where the old owner bought the extensions but here is a pic of them so you can see anyways.

[image]http://www.scattabrain.com/cbr/clean/side_headlight.jpg[/image]

iRIDE -> RE: Two Bros Hi Mount + Pass. Pegs (6/30/2008 1:54:18 PM)

I have a couple spacers that are about 3 inches long and longer bolts. You can kinda see it in this picture.

[image]http://img.photobucket.com/albums/v51/shamain/DSC01383.jpg[/image]

WOT -> RE: Two Bros Hi Mount + Pass. Pegs (6/30/2008 1:57:00 PM)

My Devil high mount has a spacer... but I just ditched the pegs anyway.

whtan20 -> RE: Two Bros Hi Mount + Pass. Pegs (7/2/2008 8:08:19 PM)

quote:

ORIGINAL: iRIDE

I have a couple spacers that are about 3 inches long and longer bolts. You can kinda see it in this picture.

[image]http://img.photobucket.com/albums/v51/shamain/DSC01383.jpg[/image]


Where did you get these? I''m not sure what to look for in terms of spacers when i go to the hardware store.

iRIDE -> RE: Two Bros Hi Mount + Pass. Pegs (7/3/2008 7:04:28 AM)

These came with the exhaust but are nothing more than just a plastic tube.

fatheadon1 -> RE: Two Bros Hi Mount + Pass. Pegs (7/3/2008 2:25:57 PM)

i used a pipe that a cut to the lenght needed

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.