Two Bros Hi Mount + Pass. Pegs

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Two Bros Hi Mount + Pass. Pegs

Printable Version

CBR Forums >> Current Honda CBR Models >> CBR 600F4i >> Two Bros Hi Mount + Pass. Pegs

Page: [1]

Message

<< Older Topic Newer Topic >>

Two Bros Hi Mount + Pass. Pegs - 6/29/2008 11:56:37 PM

whtan20

Posts: 373
Joined: 10/10/2007
Status: offline

For those who have the two bros high mount or any other high mount exhaust that uses similar mounts how would i be able to keep my passenger pegs? The exhaust is obstructing the placement of my passenger pegs and i''m not sure if it''s possible to have them on with this exhaust.

Post #: 1

RE: Two Bros Hi Mount + Pass. Pegs - 6/30/2008 5:13:00 AM

Maniak05

Posts: 53
Joined: 5/24/2008
Status: offline

I dont know of any F4i''s...but my buddy with an ''02 954RR just has a 2-3in spacer on the bracket holes. It literally looks like a deep socket off a socket set. And a longer bolt through the middle of course.

_____________________________

(in reply to whtan20)

Post #: 2

RE: Two Bros Hi Mount + Pass. Pegs - 6/30/2008 5:47:54 AM

PlayfulGod

Posts: 3382
Joined: 6/9/2007
From: Dalton, GA
Status: offline

quote:

ORIGINAL: Maniak05

I dont know of any F4i''''s...but my buddy with an ''''02 954RR just has a 2-3in spacer on the bracket holes. It literally looks like a deep socket off a socket set. And a longer bolt through the middle of course.

^ purdy much the same dealio.

_____________________________

For All your Hosting Needs, TechyGeek.com,
SBG

(in reply to Maniak05)

Post #: 3

RE: Two Bros Hi Mount + Pass. Pegs - 6/30/2008 6:18:56 AM

nuke79

Posts: 47
Joined: 3/2/2008
Status: offline

Go to a hardware store and get 8mm hex flat tip screws.. I searched EVERYWHERE, and finally found them at a Lowes. 8mm hex screw, 3in long. Works perfect. Need to find a hollow extension now to fill the gap between the peg and where it used to fit.

< Message edited by nuke79 -- 6/30/2008 6:29:35 AM >

(in reply to PlayfulGod)

Post #: 4

RE: Two Bros Hi Mount + Pass. Pegs - 6/30/2008 12:31:28 PM

whtan20

Posts: 373
Joined: 10/10/2007
Status: offline

quote:

ORIGINAL: nuke79

Go to a hardware store and get 8mm hex flat tip screws.. I searched EVERYWHERE, and finally found them at a Lowes. 8mm hex screw, 3in long. Works perfect. Need to find a hollow extension now to fill the gap between the peg and where it used to fit.

Cool thanks, i''ll search for this. What could you use to fill the gap? A bunch of shims?

(in reply to nuke79)

Post #: 5

RE: Two Bros Hi Mount + Pass. Pegs - 6/30/2008 1:10:11 PM

scattabrain

Posts: 151
Joined: 7/24/2007
Status: offline

I bought my bike with a high mount exhaust on it already so i don''t know where the old owner bought the extensions but here is a pic of them so you can see anyways.