please help getting fed up (Full Version)

CBR Forum >> Past CBR Models >> CBR 600F3

please help getting fed up

  

f2framef3motor -> please help getting fed up (7/1/2008 11:49:31 AM)





here is the prob i am putting f3 motor into a f2 frame when doing this i realized that the f3 had a throttle pos sensor the f2 didnt. sence i am using the f2 wiring harness i called the honda shopp and they said that it didnt need to be hooked up so i hooked everything else up. now when i start it i cant get the idle below 2000 rpms and when i give it gas it boggs out and cuts off. so i took it up to a shop (thinking that the carbs needed to be adjusted) the guy at the shop told me that i need the throttle pos hooked up. also he told me i need a fuel pump something else my f2 did not have i was told you only need one if you have a ram air since i was using the f2 air box i did not buy one. so is there a way around this or do i need to buy a harness and ecu and just switch it to ram air with the pump. help if you can anything is better than nothing. thanks        
[sm=wtf.gif]



  
rider0033 -> RE: please help getting fed up (7/1/2008 12:43:45 PM)

i think you pretty much answered your own question but you dont know if your ready to shell out more money right now. think of it this way: you are basically running a f3 now. yes you will need the rest of the parts to run it THE RIGHT WAY cause it''s now a f3. you could go the long way around it but sooner than later your going to run into the issue again.

rider0033 -> RE: please help getting fed up (7/1/2008 12:45:46 PM)

heres a tool to help you analyze the changes
http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/1/Make/Honda/YearID/38/Year/1997/ModelID/6748/Model/CBR600F3

f2framef3motor -> RE: please help getting fed up (7/1/2008 1:14:19 PM)




ok ill get the pump,ram air,ecu,harness but will i need anything else that u no of ot make this work will the harness hook up to the rest of the f2 componets sry if im asking dumb questions but if im going to do it i would like to no what all i need before i get into it again lol and find out the hard way that i have need something else



f2framef3motor -> RE: please help getting fed up (7/1/2008 1:18:30 PM)




also i have a 96 motor with 98 carbs no difference right or did i make another mistake



neely321 -> RE: please help getting fed up (7/1/2008 1:49:02 PM)

The motor did not change from 96-98. The only change was the tail set up.

marc0011 -> RE: please help getting fed up (7/2/2008 7:04:06 AM)

Look on ebay, you''ll find all the ram air hoses, fuel pump, and air box pretty cheap.

kjohnson -> RE: please help getting fed up (7/2/2008 6:26:10 PM)

You can run your bike without a TPS and without a fuel pump.No need to get a harness either.

If your bike bogs and shuts down,synch the carbs,change the air filter and plugs.

A fuel pump is only needed for those long pulls in 4-6th gear,wide open,with ram air.Ram air pressurizes and dries out the float bowls when you haul ass wide open in 4th to 6th gear.Fuel pump helps it out a wee-bit,keeping enough gas going to the motor.

Look at my sig line.I did the same thing with my racebike,and learned the hard way.She now runs like a dog shot in the ass!!

Scrufdog -> RE: please help getting fed up (7/2/2008 7:11:52 PM)

I''d have to agree with kjohnson. Putting an F3 motor in an F2, using the stock F2 harness, means you can drop some F3 stuff. No TPS, no fuel pump. I might run a pump anyway, since it wouldnt hurt.

f2framef3motor -> RE: please help getting fed up (7/2/2008 7:58:04 PM)




ok this might be a stupid question but how do i go about sync. the carbs new to this  i already changed the plugs and a filter so it wouldnt hurt to try sync the carbs if i put the fuel pump on should i also put a ram air on or will it matter



kjohnson -> RE: please help getting fed up (7/3/2008 10:00:55 AM)

If you use an F3 airbox,you will need the fuel pump.

If you use an F2 airbox,you will not need a fuel pump. If you are going this route,I would NOT use a fuel pump.

You Will have to still run the vacuum line from your cylinder head to the petcock.

f2framef3motor -> RE: please help getting fed up (7/3/2008 12:25:55 PM)




one more question then ill stop [X(]    i have three tubes comming out ov the carbs i no all three are air tubes the big one it the mittle  i have a spot for on my f2 air box but the two little one on the sides i dont i just left them hanging there should i connect them and run them tho  a filter of some sort or plugg them  like i said first time messing with a engine and i got this far but i no nothing about carbs



  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.