triple trees (Full Version)

CBR Forum >> Past CBR Models >> CBR 954RR

triple trees

bajaroots -> triple trees (7/1/2008 3:06:56 PM)
How easy is it to remove and install the upper triple tree . Installing a chrome one want to do it myself

pimpncbr954s -> RE: triple trees (7/1/2008 4:42:27 PM)
Simple, remove the large hex head bolt, loosen the bolts that clamp the forks, when you pull it up just disconnect the ignition. From there you unscrew the screws that mount the ignition to the tree(i believe its 2 philips head and two allen key screws), reinstall on new one in reverse order but dont over tighten(if its stock then your okay, if its one of those pittech from ebay then do not overtighten). When i replaced mine with a aftermarket polished one it took me a total of maybe less than 10 minutes.

doogstar -> RE: triple trees (7/1/2008 9:29:53 PM)
Be careful though, I went through hell removing my ignition from the tree. The bolts on there are tighten only bolts. I had to drill them out using the reverse threader, then order new bolts.

bajaroots -> RE: triple trees (7/2/2008 3:52:22 AM)
hey thanks fellas for the quick response looks pretty easy

CBR_954_RR -> RE: triple trees (7/4/2008 2:45:27 PM)
I just drilled out the old bolts, then used two hex head bolts to re-install....alot easier to remove next time....

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.