Hotbodies Instalation (Full Version)

CBR >> Current Honda CBR Models >> CBR 600RR

Hotbodies Instalation

  

Nimbus87 -> Hotbodies Instalation (7/2/2008 4:52:51 PM)

I just got my hotbodies undertail kit (off ebay). But no instructions came with it. Can anyone explain to me how to install it? I already have the stock undertail off.

  
skitzofrenzy -> RE: Hotbodies Instalation (7/2/2008 5:33:50 PM)

uh... it doesnt have any bolts or anything right? just slide it in.

oh by the way it wont fit right. you will have to cut it with a dremil tool to make it fit right. (i have one) oh also, you have to go get some resisters for the blinkers or you will pop those leds in a second

heybuddy1901 -> RE: Hotbodies Instalation (7/2/2008 6:16:08 PM)

or do it the proper way and just go get a new relay. then you dont need resistors :)

skitzofrenzy -> RE: Hotbodies Instalation (7/2/2008 6:22:14 PM)

relay... wait i thought it was resistors... damnit im confused. i hate electronics

94gtcoupe -> RE: Hotbodies Instalation (7/2/2008 8:48:01 PM)

yea you do have to cut it with a dremil to make it fit right i have one also... but instead of letting it just sit in there loose i drilled a few holes in my tail and used the little plastic screws that fan out on the back side... and i didn''t use resistors or a relay with mine and my lights still work fine, they do blink faster than slock but i like the faster blink
quote:

ORIGINAL: skitzofrenzy

uh... it doesnt have any bolts or anything right? just slide it in.

oh by the way it wont fit right. you will have to cut it with a dremil tool to make it fit right. (i have one) oh also, you have to go get some resisters for the blinkers or you will pop those leds in a second

skitzofrenzy -> RE: Hotbodies Instalation (7/2/2008 10:07:12 PM)

oh mine just popped. now i have lights that dont work cuz i will have to take the entire thing off, replace the leds. re-glue the back, then reinstal.. i just dont have the heart to do it right now

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.