change of breaks

Printable Version

CBR Forum >> Past CBR Models >> CBR 954RR >> change of breaks

Page: [1]

Login Message << Older Topic   Newer Topic >>

change of breaks - 7/11/2008 8:30:14 AM    link954   Posts: 16 Joined: 7/25/2006 Status: offline i was about to change my brake pads and was wondering if you need to do anything special to the rotors... any help Post #: 1

RE: change of breaks - 7/11/2008 9:10:55 AM    Mikes03954RR Posts: 181 Joined: 4/30/2007 From: Pewaukee WI Status: offline Are the pads worn down to the wear plate or are they just sqeaking? If they are just sqeaking, clean the inside and outside of the rotors off with break cleaner. The pad will actually skip and sqeal because there is too much break particle dust built up on the rotor. I clean my rotors off at least once a year. _____________________________ Live to ride, Ride to Live (in reply to link954) Post #: 2

RE: change of breaks - 7/11/2008 11:57:38 AM    link954   Posts: 16 Joined: 7/25/2006 Status: offline no the pads are worn down pretty bad havent been riding for that reason! (in reply to Mikes03954RR) Post #: 3

RE: change of breaks - 7/11/2008 6:45:36 PM    TK954RR Posts: 4950 Joined: 12/3/2006 From: Green Bay WI Status: offline Just the allen head to remove the rotors, i would also advise a little blue loctite for re install. _____________________________ Entrusting my life and soul to one beautiful angel. (in reply to link954) Post #: 4

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7176 doncollins 6263 tahoe sc 5876 rrasco 5620 pitsvtec 5323 d2vw14_20 5102 tk954rr 4950 vpsophmore 4730 blue fox 4577 chainstretch 4576

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology