Finished my HID''''s

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Finished my HID''''s

Printable Version

CBR >> Past CBR Models >> CBR 929RR >> Finished my HID''''s

Page: [1]

Message

<< Older Topic Newer Topic >>

Finished my HID''''s - 7/21/2008 6:41:22 AM

infared067

Posts: 37
Joined: 8/6/2007
Status: offline

Finished my retrofit a couple weeks ago.. Here''''s how it turned out.. Let me know what you guys think.

before

[

after

low beam

high beam

< Message edited by Lord Jersey -- 7/21/2008 6:45:25 AM >

Post #: 1

RE: Finished my HID''''''''s - 7/21/2008 6:46:23 AM

Lord Jersey

Posts: 966
Joined: 1/14/2006
From: Wisconsin, via New Jersey, Mass, and Penn.
Status: offline

Looks great. Nice Job.
LJ

_____________________________

Jersey Customs 715-304-8123

(in reply to infared067)

Post #: 2

RE: Finished my HID''''''''''''''''s - 7/21/2008 7:32:11 AM

ffingers

Posts: 2270
Joined: 6/1/2007
From: Chicago, IL (downtown)
Status: offline

well done....what projectors did you get and what were the size if you don''t mind me asking...

_____________________________

See bike diary!

My Buddy = Hayden06f4i
Gamertag = ffingers

(in reply to Lord Jersey)

Post #: 3

RE: Finished my HID''''''''''''''''''''''''''''''''''''... - 7/21/2008 8:14:50 PM

infared067

Posts: 37
Joined: 8/6/2007
Status: offline

quote:

ORIGINAL: ffingers

well done....what projectors did you get and what were the size if you don''''''''t mind me asking...

Not at all... I used E55 bixenon projectors that I found on ebay... here are some dimensions off of HIDplanet.com/forums (that site is awesome)... found in the university section

quote:

Orignial: EunosTT

Hella 2nd Gen Bi-Xenon (aka E55):
Diameter = 79.80mm
Height = 96.95mm
Width = 106.15mm
Length = 163.35mm
Length(seat of the lens to possible mounting holes) = 58.80mm
Length(possible mounting holes to end of bulb) = 83.90mm
Width(between top mounting holes) = 77.25mm
Width(between bottom mounting holes) = 93.25mm
Height(between mounting holes) = 58.90mm

< Message edited by infared067 -- 7/21/2008 8:21:35 PM >

(in reply to ffingers)

Post #: 4

RE: Finished my HID''''''''''''''''''''''''''''''''''''... - 7/21/2008 10:30:04 PM

PYRO929

Posts: 149
Joined: 1/15/2008
From: Rock Hill, SC
Status: offline

how much hassel was that? I would love to do somethin like that, but what all was involved????

(in reply to infared067)

Post #: 5

RE: Finished my HID''''''''''''''''s - 7/22/2008 1:39:04 PM

Muffler

Posts: 2
Joined: 5/13/2008
From: Russia.Saint-Petersburg
Status: offline

perfect! Respect! Looks quote unusual but effective.

(in reply to infared067)

Post #: 6

RE: Finished my HID''''''''''''''''''''''''''''''''s - 7/22/2008 11:01:07 PM

skubysnak

Posts: 296
Joined: 4/21/2007
Status: offline

Yea, how difficult was the install???

(in reply to Muffler)

Post #: 7

RE: Finished my HID''''''''''''''''''''''''''''''''''''... - 7/23/2008 10:54:43 AM

infared067

Posts: 37
Joined: 8/6/2007
Status: offline

The whole thing took me about a week to finish... the hardest part of everything is figuring out how to mount the projectors, ballasts and ignitors. Basically the whole job in a nut shell consists of taking your headlight apart, mounting the projector, making a wiring harness for the new electrical parts, mounting the electricals, and putting everything back together again. I would definatly check out http://hidplanet.com/forums if your thinking about doing a similar project. There''s tons of write-ups and other helpful information on there.

(in reply to skubysnak)

Post #: 8