Head gasket part number

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Head gasket part number

Printable Version

CBR >> Past CBR Models >> CBR 1000F "Hurricane" >> Head gasket part number

Page: [1]

Message

<< Older Topic Newer Topic >>

Head gasket part number - 8/12/2008 4:07:40 PM

meatpopsicle

Posts: 37
Joined: 11/11/2006
Status: offline

I''m trying to replace my head gasket. Both Bikebandit.com and hondaparts-direct.com list two different part numbers. I have no way of knowing which one I need. does anybody who''s replaced their head gasket remember which one it is, or if it matters? Also, a lot of the parts places I''ve looked at say the bore is 79mm, but it''s actually 77mm. Are they listing the bore for the gasket itself?

Post #: 1

RE: Head gasket part number - 8/12/2008 5:14:27 PM

Trips

Posts: 801
Joined: 3/31/2005
From: Perth (Western Australia)
Status: offline

Bike Bandit shows their own internal part nos.

Go to www.ronayres.com for the correct part numbers or download my microfiche if you have a 92 onwards bike.

Or buy an aftermarket one from ebay.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=020&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=300095429647&rd=1

Often it is cheaper to buy an entire gasket kit of ebay of place the The Old Bike Barn

< Message edited by Trips -- 8/12/2008 5:15:56 PM >

_____________________________

Remember the light at the end of the tunnel may be an oncoming train!

(in reply to meatpopsicle)

Post #: 2

RE: Head gasket part number - 8/12/2008 5:37:29 PM

meatpopsicle

Posts: 37
Joined: 11/11/2006
Status: offline

I think you meant www.ronayers.com, not www.ronayres.com Either way though It doesn''t help. Ronayres.com shows three different part numbers with no explanation: 12251-MZ1-003, 12251-MM5-014, 12251-MM5-004.

(in reply to Trips)

Post #: 3

RE: Head gasket part number - 8/12/2008 6:35:39 PM

malbojah

Posts: 397
Joined: 3/10/2006
From: Cape Cod, MA
Status: offline

For the 9-91 and 93-96, the current part# is 12251-MW7-791 (from servicehonda.com)

For the 87 model, use 12251-MM5-004

For the 88 model, use 12251-MM5-014 or 12251-MZ1-003. Something tells me that the MM%-014 has been superseded by the MZ1-003 number

_____________________________

I''ll fix the HOW TO''s once the forums are fixed

HOW TO: Valve Adjustment

HOW TO: Plastic Speedo Gear Replacement

HOW TO: Clutch Replacement (PICTURE INTENSE)
http://www.cbrforum.com/m_266491/mpage_1/key_/tm.htm#266491

(in reply to meatpopsicle)

Post #: 4

RE: Head gasket part number - 8/13/2008 8:42:49 AM

meatpopsicle

Posts: 37
Joined: 11/11/2006
Status: offline

That''s what I needed. Thanks.

(in reply to meatpopsicle)

Post #: 5