ANOTHER FRAME SLIDERS THREAD (but different)
Login  | |
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 11:16:20 AM
|
|
|
be vertical
Posts: 659
Joined: 8/21/2007
Status: offline
|
You have everything in your cart except the frame sliders themselves.
You have both the rear sets in there, which might be confusing you. The Swingarm Sliders go through the axle. The ''cottonreels'' are actually called spools, and although they do provide protection, they are really intended as a rear stand mount. You need to actually add ''Frame'' sliders to the cart. On that note I would get no-cuts if you can.
Shogun makes them, as does motovation Additionally, I would stay away from any slider made from metal. They are supposed to grind down and protect your plastic. Many people have bad bad experiences with metal sliders, as they can grab the pavement and send your baby into the sky.
_____________________________
On the black wind forever we ride on together destroying your evil with freedom our guide.
07 600RR .......O^o''
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 11:31:03 AM
|
|
|
garyward
Posts: 130
Joined: 4/7/2008
Status: offline
|
I would get no-cuts but too many people have had issues with them not being as sturdy and stable as the cut ones. I actually like the looks of the cut ones once you put a rubber seal around the fairing. It makes it look much cleaner IMO
_____________________________
2006 Honda CBR 600 RR
Mods:
Tag Eliminator Kit
Integrated Tail Light
Two-Brothers M2 Exhaust
Future Mods:
Flush Mount Turn Signals
Gold Levers
Scotts Dampner
Pitbull Bike Stands
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 12:23:05 PM
|
|
|
PlayfulGod
Posts: 3746
Joined: 6/9/2007
From: Dalton, GA
Status: online
|
quote:
ORIGINAL: garyward
I would get no-cuts but too many people have had issues with them not being as sturdy and stable as the cut ones. I actually like the looks of the cut ones once you put a rubber seal around the fairing. It makes it look much cleaner IMO
^^^^Smart man 
_____________________________
For All your Hosting Needs, TechyGeek.com
SBG
PC Gamer Tag: The_Plague
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:01:56 PM
|
|
|
skitzofrenzy
Posts: 726
Joined: 4/11/2008
From: 916 sacramento, california
Status: offline
|
i wish i had the picture, but i dont. dont get no cuts they end up causing more damage then they ever could of been saving. they bend back and get smashed into the strator and gear box or they just plain snap off and dont do any good anyways. and yes, metal sliders are bad.. for the previously stated reason, but also b cuz hard metal has no give.. if you smash down on your side , that slider wont give any and will end up bending your frame
_____________________________
2001 F4i~RIP ~
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:08:26 PM
|
|
|
garyward
Posts: 130
Joined: 4/7/2008
Status: offline
|
i know  that''s what i said above (:
_____________________________
2006 Honda CBR 600 RR
Mods:
Tag Eliminator Kit
Integrated Tail Light
Two-Brothers M2 Exhaust
Future Mods:
Flush Mount Turn Signals
Gold Levers
Scotts Dampner
Pitbull Bike Stands
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:14:58 PM
|
|
|
Blue Fox
Posts: 4575
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline
|
I have the no-cut Lightning Performance frame sliders. Absolutely fantastic. Bike fell off the rear stand in the paddock a few months ago, and it didn''''t even hint at trying to bend. It''''s a 1-inch thick piece of aluminum that''''s about 2 inches in total length. In fact, I''''m still using the spacer it fell on (pictured below). The slider actually collapses slightly to absorb the brunt of the impact. Just replaced the slider and couldn''''t be happier.
There are different quality and designs of no-cuts out there, but that doesn''t mean all of them are crap. This coming from someone who actually has them and has had to use them.
< Message edited by Blue Fox -- 8/18/2008 6:17:06 PM >
_____________________________
Want the LED headlamps? http://cbrforum.com/m_681535/tm.htm Powder Coating TOO!
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:20:58 PM
|
|
|
garyward
Posts: 130
Joined: 4/7/2008
Status: offline
|
okay: since everyone is confused and nobody has helped me since my original question was answered and everybody has ignored my second question here are the questions from the original posts:
Is this a full and complete setup?
Am I missing anything?
The following question is where can I find the R&G Frame Sliders? I was able to find all of the set except the ones that mount to the engine section. Maybe the employee on the forum will see this and respond...
_____________________________
2006 Honda CBR 600 RR
Mods:
Tag Eliminator Kit
Integrated Tail Light
Two-Brothers M2 Exhaust
Future Mods:
Flush Mount Turn Signals
Gold Levers
Scotts Dampner
Pitbull Bike Stands
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:22:59 PM
|
|
|
Blue Fox
Posts: 4575
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline
|
^^ Sorry man, threads get sidetracked VERY easily on this site. Let me take a look at it and see where the actual frame sliders are........
< Message edited by Blue Fox -- 8/18/2008 6:26:16 PM >
_____________________________
Want the LED headlamps? http://cbrforum.com/m_681535/tm.htm Powder Coating TOO!
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:24:21 PM
|
|
|
garyward
Posts: 130
Joined: 4/7/2008
Status: offline
|
thanks blue. I''ve noticed especially with flaming... lol
_____________________________
2006 Honda CBR 600 RR
Mods:
Tag Eliminator Kit
Integrated Tail Light
Two-Brothers M2 Exhaust
Future Mods:
Flush Mount Turn Signals
Gold Levers
Scotts Dampner
Pitbull Bike Stands
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:27:49 PM
|
|
|
Blue Fox
Posts: 4575
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline
|
I don''t see any R&G frame sliders anywhere on that site for an 06 600RR. All I see is the crash kit for the 07/08......which is exactly what you need, but for the 06.
_____________________________
Want the LED headlamps? http://cbrforum.com/m_681535/tm.htm Powder Coating TOO!
|
|
|
|
|
RE: ANOTHER FRAME SLIDERS THREAD (but different) - 8/18/2008 6:29:46 PM
|
|
|
garyward
Posts: 130
Joined: 4/7/2008
Status: offline
|
What is the "crash kit" would that consist of all the sliders R&G makes in one nice package? :D cuz thats totally badass
_____________________________
2006 Honda CBR 600 RR
Mods:
Tag Eliminator Kit
Integrated Tail Light
Two-Brothers M2 Exhaust
Future Mods:
Flush Mount Turn Signals
Gold Levers
Scotts Dampner
Pitbull Bike Stands
|
|
|
|
|
Printable Version
ANOTHER FRAME SLIDERS THREAD (but different) - 
