CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

954 Hotbodies Undertail Kit

  Printable Version
CBR Forum >> Past CBR Models >> CBR 954RR >> 954 Hotbodies Undertail Kit Page: [1]
Login
Message << Older Topic   Newer Topic >>
954 Hotbodies Undertail Kit - 8/27/2008 10:23:59 AM   
buffddy16

 

Posts: 61
Joined: 7/10/2008
Status: offline
I got the Hotbodies Undertail Kit for my 954 but the directions blow cant see any of the pictures to go buy. Anyone have any tips on the install?
Post #: 1
RE: 954 Hotbodies Undertail Kit - 8/27/2008 11:43:58 AM   
Ironhead

 

Posts: 96
Joined: 7/16/2007
Status: offline
Be very careful when you make the cuts on the stock piece. Its easier to chip away at it. If you take too much material....your screwed. I used a dremel. Remove the whole stock tail piece. Its easier to work with when off the bike. Then start cutting away. When you think you are close. re install the stack piece and then fit the Hot bodies to see where you are at. Its a bitch. But take your time and it will be well worth it. Dont rush this job.

_____________________________

Boldly Going Nowhere!
Tuck in behind me: I'll show you where to crash........

(in reply to buffddy16)
Post #: 2
RE: 954 Hotbodies Undertail Kit - 8/27/2008 11:54:16 AM   
buffddy16

 

Posts: 61
Joined: 7/10/2008
Status: offline
what part of the stock tile do you need to cut off? is that lip that the stock undertail sets in?

(in reply to Ironhead)
Post #: 3
RE: 954 Hotbodies Undertail Kit - 8/27/2008 12:11:17 PM   
Ironhead

 

Posts: 96
Joined: 7/16/2007
Status: offline
Hopefully this pic helps. You can clearly see how much I left of the stock fender. Keep cutting back the fender until the Hotbodies sits flush on the fender.  On the edges. You make the cuts so the stock bolts that hang the fender are left intact. The whole rear section of the stock fender are chopped out. My Autocomm, PC3 and UFO light kit are blocking the rest.



_____________________________

Boldly Going Nowhere!
Tuck in behind me: I'll show you where to crash........

(in reply to buffddy16)
Post #: 4
RE: 954 Hotbodies Undertail Kit - 8/27/2008 12:17:36 PM   
Ironhead

 

Posts: 96
Joined: 7/16/2007
Status: offline
Keep trimming and fitting the tail piece. You should end up with a nice clean fit when done. No gaps. As a side note. Take the piece of foam tape under the rear light on your stock tailpiece and gently remove it. Install it on your undertail under the tail light as well.



_____________________________

Boldly Going Nowhere!
Tuck in behind me: I'll show you where to crash........

(in reply to Ironhead)
Post #: 5
RE: 954 Hotbodies Undertail Kit - 8/27/2008 12:21:27 PM   
buffddy16

 

Posts: 61
Joined: 7/10/2008
Status: offline
thanks for the pics that helps a lot

(in reply to Ironhead)
Post #: 6
RE: 954 Hotbodies Undertail Kit - 8/27/2008 12:34:55 PM   
Ironhead

 

Posts: 96
Joined: 7/16/2007
Status: offline
Good Luck Buff! Dont start cracking open the beers until your done with this project. Have patience with it. You will love the way it cleans the butt of the 54 up!

_____________________________

Boldly Going Nowhere!
Tuck in behind me: I'll show you where to crash........

(in reply to buffddy16)
Post #: 7
RE: 954 Hotbodies Undertail Kit - 8/27/2008 12:41:56 PM   
buffddy16

 

Posts: 61
Joined: 7/10/2008
Status: offline
yea ill just pop a few perkisets to help with all the headaches im gonna get puttn this thing on and maybe a budwiser or two to help me consentrate haa. thanks for the help Ironhead

(in reply to Ironhead)
Post #: 8
RE: 954 Hotbodies Undertail Kit - 8/27/2008 2:12:47 PM   
YAM93


Posts: 185
Joined: 2/2/2008
From: Maryland
Status: offline
YAM93's photo gallery
NICE job IRONHEAD.  I wish mine looked that clean.  It looks pretty good on the outside though, and keeps gloves and registration papers from falling out the arse-end. 



_____________________________



(in reply to buffddy16)
Post #: 9
RE: 954 Hotbodies Undertail Kit - 8/27/2008 5:11:21 PM   
Ironhead

 

Posts: 96
Joined: 7/16/2007
Status: offline
Thanks! The pics they include from Hotbodies looks like it came from the art department at Goodwill. They were useless. I had to hook up a fellow 954er

_____________________________

Boldly Going Nowhere!
Tuck in behind me: I'll show you where to crash........

(in reply to YAM93)
Post #: 10
RE: 954 Hotbodies Undertail Kit - 8/27/2008 7:21:06 PM   
CBRinPDX


Posts: 282
Joined: 11/12/2006
Status: offline
quote:

ORIGINAL: Ironhead
looks like it came from the art department at Goodwill.




(in reply to Ironhead)
Post #: 11
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
CBR >> Past CBR Models >> CBR 954RR
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl7156
doncollins6257
tahoe sc5874
rrasco5615
pitsvtec5323
d2vw14_205093
tk954rr4893
vpsophmore4716
blue fox4575
havoc4551

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.