carb rebuild

Printable Version

CBR >> Past CBR Models >> CBR 600F >> carb rebuild

Page: [1]

Login Message << Older Topic   Newer Topic >>

carb rebuild - 8/27/2008 7:09:53 PM    hypeshipe   Posts: 43 Joined: 8/26/2008 Status: offline Any body ever seem to find a carb rebuild kit (specifically gaskets) for the 600f1? .. or do i have to pick through what i need off of a parts fiche? Post #: 1

RE: carb rebuild - 8/27/2008 7:42:14 PM    stinemonster   Posts: 81 Joined: 7/26/2008 Status: offline Check out... cyclepartsnation.com http://www.cyclepartsnation.com/pages/parts/viewbybrand/7/Honda.aspx They have some gasket kits for the carbs. You can order it from them or copy that part number and use it at... servicehonda.com http://www.servicehonda.com/parts.php ServiceHonda has the better prices but I''ve had problems viewing their catalogs.  Some of the guys in here turned me onto the place. If anything, call or email these guys and tell them what you are needing.  I''ve talked to a guy there and his email is jordan@servicehonda.com I''ve had problems with cyclepartsnation but their customer service was pretty good. (in reply to hypeshipe) Post #: 2

RE: carb rebuild - 8/27/2008 8:04:31 PM    hypeshipe   Posts: 43 Joined: 8/26/2008 Status: offline i couldnt find any kits in specific to the carbs there, just the parts fiche (in reply to stinemonster) Post #: 3

RE: carb rebuild - 8/27/2008 8:11:55 PM    stinemonster   Posts: 81 Joined: 7/26/2008 Status: offline Here''''s a kit number that I just pulled up from there... 16010-MN4-305 If you go to the carbs layout there are part numbers below see (attached print screen). Thumbnail Image Every seal/oring that has a "1" pointing to it goes in this kit. Attachment (1) < Message edited by stinemonster -- 8/27/2008 8:16:32 PM > (in reply to hypeshipe) Post #: 4

RE: carb rebuild - 8/27/2008 8:27:03 PM    stinemonster   Posts: 81 Joined: 7/26/2008 Status: offline This website has CARB (COMPONENTS) and CARB (ASSY).  Both sections have kits in them.  See attachment for the other gasket kit... Thumbnail Image Attachment (1) < Message edited by stinemonster -- 8/27/2008 8:30:59 PM > (in reply to stinemonster) Post #: 5

RE: carb rebuild - 8/28/2008 3:24:30 PM    hypeshipe   Posts: 43 Joined: 8/26/2008 Status: offline thanks. i ordered what i needed.  btw i found that cheapcycleparts.com had prices similar to cyclepartsnation.com and they had a parts fiche on the site instead of having to know your own parts numbers (in reply to stinemonster) Post #: 6

RE: carb rebuild - 8/28/2008 6:36:49 PM    stinemonster   Posts: 81 Joined: 7/26/2008 Status: offline servicehonda.com had the cheap parts.  Cyclepartsnation.com had the fiche you needed.  Compare your prices with servicehonda.com.  With the cost being that low, there may not be much of a difference. Oh Yea, cyclepartsnation.com wants to charge a minimum shipping cost of $17.  I don''t know if that''s everyone or just them. (in reply to hypeshipe) Post #: 7

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7156 doncollins 6257 tahoe sc 5874 rrasco 5615 pitsvtec 5323 d2vw14_20 5093 tk954rr 4893 vpsophmore 4716 blue fox 4575 havoc 4551

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology