safety switch w/the clutch lever???????????

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

safety switch w/the clutch lever???????????

Printable Version

CBR >> Past CBR Models >> CBR 900RR >> safety switch w/the clutch lever???????????

Page: [1]

Message

<< Older Topic Newer Topic >>

safety switch w/the clutch lever??????????? - 8/31/2008 7:23:01 PM

rons93rr

Posts: 346
Joined: 3/13/2008
From: peabody ma 01960
Status: offline

does anyone know if there is a safety switch for the clutch lever? i already know that my switch for my side stand switch is bad, so i just start my bike in neutral every time. there are times that the bike will not start when in neutral so i then need to hold the clutch lever in to get it started. i was just curious to see if this is caused from something else other than the side stand switch.
thanks, ron

_____________________________

93 rr mint red,white & blue w/d&d jetted w/20k miles

Post #: 1

RE: safety switch w/the clutch lever??????????? - 9/1/2008 5:52:40 PM

MI900RR

Posts: 73
Joined: 6/26/2008
Status: offline

The Clymer wiring diagram (pg. 514 if you have the manual) does show a two-contact clutch switch. One wire goes to the starter relay (which is directly wired to the main fuse) and the other wire goes to the side stand switch. Following the wiring harness from either of those points should lead you to it. A lot of people bypass the stand switch, guess you could just as easily bypass both of them. Hope this helps.

< Message edited by MI900RR -- 9/1/2008 5:58:11 PM >

(in reply to rons93rr)

Post #: 2

RE: safety switch w/the clutch lever??????????? - 9/1/2008 8:25:18 PM

rons93rr

Posts: 346
Joined: 3/13/2008
From: peabody ma 01960
Status: offline

thanks alot i''ll check it out. these bikes have more safety''s than i know what to do with.

_____________________________

93 rr mint red,white & blue w/d&d jetted w/20k miles

(in reply to MI900RR)

Post #: 3