wheelies
Login  | |
|
wheelies - 9/1/2008 7:05:19 PM
|
|
|
Coop43
Posts: 17
Joined: 7/31/2008
Status: offline
|
what sprocket ratio can you guys pull your bikes up in first gear with ????
|
|
|
|
|
|
|
|
|
RE: wheelies - 9/2/2008 2:27:12 PM
|
|
|
ynks4evr
Posts: 581
Joined: 5/9/2007
From: neptune, nj
Status: offline
|
you can wheelie an f4 just fine stock, power wheelies or clutch wheelies
_____________________________
95 f3
Yoshi slip-on
|
|
|
|
|
RE: wheelies - 9/2/2008 4:24:13 PM
|
|
|
emperor wurm
Posts: 29
Joined: 7/13/2007
From: yorba linda, ca
Status: offline
|
not true....i cant power wheelie my bike. has anyone power wheelied their f4? just curious. I only did it once but it was on accident, I was being a squid and my lady was on the back, when I punched it the front end came up, but that was the only time.
_____________________________
00 cbr f4
- orange and black
-(-1) Rk chain
- D&D
hawk = poser
|
|
|
|
|
RE: wheelies - 9/2/2008 5:36:53 PM
|
|
|
Coop43
Posts: 17
Joined: 7/31/2008
Status: offline
|
umm ive tried pretty hard to pull mine up and even with -1 its hard, I have to hit everything just right to really get it up i can do little ones all day with on off throttle im asking how much of a difference does it make per tooth when you add in the back. my bike is lowered so i really dont know if that effects it at all
< Message edited by Coop43 -- 9/2/2008 5:38:27 PM >
|
|
|
|
|
RE: wheelies - 9/3/2008 9:57:07 AM
|
|
|
emperor wurm
Posts: 29
Joined: 7/13/2007
From: yorba linda, ca
Status: offline
|
if your bike is lowered your not going to wheelie. it streches the wheel base which inhibits the bike from doing wheelies.
_____________________________
00 cbr f4
- orange and black
-(-1) Rk chain
- D&D
hawk = poser
|
|
|
|
|
RE: wheelies - 9/3/2008 8:10:40 PM
|
|
|
mikebluep5
Posts: 77
Joined: 4/27/2008
Status: offline
|
I have a k&n, shorty two bros, jet kit and -1 in the front with a 520 conversion and roll ons in first bring the front up, shift to second it comes up again. cool weather intensifies this as i found out tonight on accident. If i would have went with the -1/+2 combo i would probably be getting a good asphalt back scratch
< Message edited by mikebluep5 -- 9/3/2008 8:11:39 PM >
|
|
|
|
|
RE: wheelies - 9/3/2008 9:04:56 PM
|
|
|
Coop43
Posts: 17
Joined: 7/31/2008
Status: offline
|
really hmm on good days when i first start the bike and its not all the way warm yet i can pull the front up in first not alot though so maybe lowering it has something to do with it I am also K&N, stage 2 jetted, -1, and short D&D pipe, I tried some clutch ones today and it pulled up fairly easy in 2nd
|
|
|
|
|
RE: wheelies - 9/3/2008 9:09:24 PM
|
|
|
dashle
Posts: 170
Joined: 7/21/2008
Status: offline
|
try compressing the front shocks with your body weight just before you blip the throttle. that little extra will get your bike in the air no problem. its just a quick push down on the handlebars.
_____________________________
07 black&chrome cbr1000rr
yoshi slip on, LED light kit,
02 cbr 954rr
custom paint, micron exhaust, LED light kit,1 down front sprocket and jetted
02 gixxer 600
full yoshi exhaust, LED light kit
|
|
|
|
|
RE: wheelies - 9/3/2008 9:12:19 PM
|
|
|
Xlr82165
Posts: 6
Joined: 4/13/2008
Status: offline
|
All i have to say is Power Wheelies FTL and Clutch Wheelies FTW All DAY!
|
|
|
|
|
RE: wheelies - 9/3/2008 10:58:43 PM
|
|
|
dashle
Posts: 170
Joined: 7/21/2008
Status: offline
|
hang your nuts out, you''ll get good wheelies that way
_____________________________
07 black&chrome cbr1000rr
yoshi slip on, LED light kit,
02 cbr 954rr
custom paint, micron exhaust, LED light kit,1 down front sprocket and jetted
02 gixxer 600
full yoshi exhaust, LED light kit
|
|
|
|
|
RE: wheelies - 9/4/2008 9:32:41 AM
|
|
|
edubF3
Posts: 54
Joined: 7/10/2007
Status: offline
|
When I had -1 front, I could power wheelies in 1st by rocking the throttle. I would have to clutch 2nd to get it up sitting or standing. Now it has -1Front/+4Rear with a 520 conv and a slip-on. Still can''t power 2nd, but clutching 2nd is waaay more fun!
_____________________________
95 F3(first bike)
97 VTR1000(Superhawk)
02 R1
98 F3
97 F3
99 F4 (current bike)
|
|
|
|
|
RE: wheelies - 9/4/2008 1:14:01 PM
|
|
|
N8 Dawg
Posts: 1763
Joined: 7/18/2006
From: Middletown OH
Status: offline
|
dang +4 in the rear...I just order my sprockets/chain the other day and went with -1/+2 and went with a 525 conv.
_____________________________
 >
|
|
|
|
|
RE: wheelies - 9/5/2008 1:10:19 AM
|
|
|
dashle
Posts: 170
Joined: 7/21/2008
Status: offline
|
im stock and a second gear wheelie is cake on the 1000 or the 600.
_____________________________
07 black&chrome cbr1000rr
yoshi slip on, LED light kit,
02 cbr 954rr
custom paint, micron exhaust, LED light kit,1 down front sprocket and jetted
02 gixxer 600
full yoshi exhaust, LED light kit
|
|
|
|
|
RE: wheelies - 9/5/2008 10:31:40 AM
|
|
|
1999cbrF4rebuild
Posts: 1
Joined: 9/3/2008
Status: offline
|
quote:
ORIGINAL: emperor wurm
if your bike is lowered your not going to wheelie. it streches the wheel base which inhibits the bike from doing wheelies.
does it matter how much the bike has been lowered.. i did pull it up once before getting the lowering done but since then its pretty difficult... everyone keeps trying to get me to clutch it up but dont want to screw anything up on the bike
|
|
|
|
 Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
About Us |
Archive |
Honda CBR Motorcycle Links |
Legal |
Privacy Policy |
© CBR Forum
CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.
|
Printable Version
