Is this big problem with exchanging 16 inch

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Is this big problem with exchanging 16 inch

Printable Version

CBR Forum >> Past CBR Models >> CBR 900RR >> Is this big problem with exchanging 16 inch

Page: [1]

Message

<< Older Topic Newer Topic >>

Is this big problem with exchanging 16 inch - 2/21/2006 1:50:22 PM

imans

Posts: 1
Joined: 2/21/2006
Status: offline

front wheel into 17 inch new model front wheel. I have a problem with 16 inch tire in front so I would like to change it. Is there anybody who did it?

Post #: 1

RE: Is this big problem with exchanging 16 inch - 4/8/2006 12:21:20 AM

Snappy

Posts: 9
Joined: 4/7/2006
Status: offline

I swapped mine with a 17' from an f3. The rotors from my 99 900rr had the same bolt pattern but the offset was different. So I used the 900rr rotors on the f3 wheel and then I had to make spacers. It was not that difficult at all. But if I could do it all over again I would swap the whole front end with one from a 929 or 954. Then you have the better brakes and inverted forks.

(in reply to imans)

Post #: 2