ignition help

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

ignition help

Printable Version

CBR Forums >> Current Honda CBR Models >> CBR 600F4i >> ignition help

Page: [1]

Message

<< Older Topic Newer Topic >>

ignition help - 10/5/2008 11:26:28 PM

Alexlittle

Posts: 11
Joined: 7/25/2008
Status: offline

I have zero spark. The only fire I can find at the primary coil harness and ecm is the black and white wire. Battery is good, bas is bypassed correctly, ignition switch is good, engine stop switch is good, kickstand switch is fine, all the easy stuff seems alright. Any suggestions would be great. Thanks

Post #: 1

RE: ignition help - 10/6/2008 6:07:18 AM

drpitlo

Posts: 55
Joined: 1/7/2008
Status: offline

check your tip over sensor behind the windshield. i bought a 01 f4i and was told the cdi box was bad after buying a cdi box it still didnt have fire come to find out the tip over sensor had been installed upside down by some shop. I turned it over and the bike got fire not to say yours is upside down but check it. also there was a write up on here about bypassing it

(in reply to Alexlittle)

Post #: 2

RE: ignition help - 10/6/2008 10:47:27 AM

Alexlittle

Posts: 11
Joined: 7/25/2008
Status: offline

I already bypassed it, didnt help

(in reply to drpitlo)

Post #: 3