Changing power Commander maps
Login  | |
|
Changing power Commander maps - 10/7/2008 7:08:28 AM
|
|
|
kwn23
Posts: 9
Joined: 9/12/2008
Status: offline
|
I just installed a PCIII on my 03 600rr. It''s running way to rich everyone tells. Loud pops and crackles anytime I let off the gas, flames whenever I rev above 10k rpm and let off or shift. I dont want to mess up the bike if this is bad for it. I dont have the 9V battery thing that comes with it being that I bought the PCIII used. In order to switch maps can I just turn the power on the bike via ignition and plug in my computer that way? Also what are the proper steps to change maps? I already have the right map for my exhaust etc on my computer ready to go.
Thanks guys
|
|
|
|
|
|
|
RE: Changing power Commander maps - 10/7/2008 7:52:42 AM
|
|
|
D2VW14_20
Posts: 5047
Joined: 7/13/2006
From: Menominee, MI to Panama City Bch,FL / Orlando,FL
Status: offline
|
Yea, if you have a laptop just bring it out side, connect to the computer, open the program, load the map, shut off, close, disconnect.
Best thing to do would be getting a custom map if its that bad though.
_____________________________
ZG Windscreen, Hotbodies Fronts, LED Pegs, Custom Seats & Cowl, Yosh RS-5
XBOX 360: D2VW14
|
|
|
|
|
RE: Changing power Commander maps - 10/7/2008 4:52:24 PM
|
|
|
sUshI
Posts: 111
Joined: 4/29/2007
Status: offline
|
quote:
ORIGINAL: kwn23
Loud pops and crackles anytime I let off the gas, flames whenever I rev above 10k rpm and let off or shift. I dont want to mess up the bike if this is bad for it.
um......sounds like the Batbike....with more suck....
J/K !!!
|
|
|
|
|
Printable Version
