??''s about frame sliders

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

??''s about frame sliders

Printable Version

CBR >> Current Honda CBR Models >> CBR 600RR >> ??''s about frame sliders

Page: [1]

Message

<< Older Topic Newer Topic >>

??''s about frame sliders - 10/7/2008 9:34:57 AM

Whittle11tish

Posts: 2
Joined: 10/7/2008
Status: offline

hey yall, i have a 08'' cbr600rr and i want to put on frame sliders well already bought the no cut sliders made of derlin... now after lots of reading and thinking i want to do the cut ones.. now heres my question can i still use the no cut sliders just not use the matal bracket which makes then the no cut?? there really cute so im hopign i can still use them but have not been able to find any answers... thank you

Post #: 1

RE: ??''''s about frame sliders - 10/7/2008 12:27:33 PM

RedRider07

Posts: 573
Joined: 4/23/2008
From: Pittsburgh, Pennsylvania
Status: online

I would not recommend doing this for one main reason. The metal bracket normally would be used takes the place of metal spacers that are already on your bike. If you decided not to use the metal bracket and just add the slider on top of the spacer, your bolt may not achieve proper torque due to the slider being added. Also, there are usually different bolts to attach the slider to the bracket, so I would be surprised if the stock engine mount bolt even fits in the slider properly.

_____________________________

CBRF Buddy:Wally28_osu

(in reply to Whittle11tish)

Post #: 2

RE: ??''''''''s about frame sliders - 10/7/2008 11:04:42 PM

Whittle11tish

Posts: 2
Joined: 10/7/2008
Status: offline

thank you i desided to put them on as no cuts for the time being and maybe later ill change them out and cut the fairing.. you were a lotta help thanks

(in reply to RedRider07)

Post #: 3

RE: ??''''''''''''''''s about frame sliders - 10/8/2008 9:34:41 AM

RedRider07

Posts: 573
Joined: 4/23/2008
From: Pittsburgh, Pennsylvania
Status: online

No problem.

_____________________________

CBRF Buddy:Wally28_osu

(in reply to Whittle11tish)

Post #: 4

RE: ??''''''''''''''''''''''''''''''''s about frame sli... - 10/8/2008 9:57:03 AM

shoortbuss

Posts: 1754
Joined: 1/13/2008
From: Pittsburgh, PA
Status: offline

While we''re on the subject....how bad is it to ride without either of these engine bolts in place?

_____________________________

CBRForum Buddy - asidari

(in reply to RedRider07)

Post #: 5

RE: ??'''''''''''''''''''''''''''''''''''''''''''''''''... - 10/8/2008 2:36:05 PM

skitzofrenzy

Posts: 726
Joined: 4/11/2008
From: 916 sacramento, california
Status: offline

prob really bad, your engine will be movin around alot due to vibration+ wieght.... i think it would cause wear alot faster and cause prob bad rubbing on parts that shouldnt be rubbed... lol

_____________________________

2001 F4i~RIP ~