starter prob

Printable Version

CBR Forums >> Past CBR Models >> CBR 600F3 >> starter prob

Page: [1]

Login Message << Older Topic   Newer Topic >>

starter prob - 10/12/2008 2:21:55 PM    stoneguy1037   Posts: 31 Joined: 6/26/2008 Status: offline i just finished putting my bike together now the starter wont turn over. I have checked the fuse also took starter off and checked that. all good is there a low oil sensor that will not allow starter to work. i have not put oil in it yet. the solonoid switch clicks also. The battery is also ok. not sure what else to check. any help would be great. Post #: 1

RE: starter prob - 10/12/2008 2:54:23 PM    stoneguy1037   Posts: 31 Joined: 6/26/2008 Status: offline i went back and checked all the fuses and made sure the wiring was all tight. also the solonoid switch clicks like crazy. not sure if this is good or bad. (in reply to stoneguy1037) Post #: 2

RE: starter prob - 10/13/2008 1:21:24 PM    stoneguy1037   Posts: 31 Joined: 6/26/2008 Status: offline i think it may just be the battery. it is on the charger, we will see (in reply to stoneguy1037) Post #: 3

RE: starter prob - 10/13/2008 1:31:40 PM    bigjohnstud4200 Posts: 137 Joined: 10/3/2008 Status: offline sounds like the battery to me... (in reply to stoneguy1037) Post #: 4

RE: starter prob - 10/14/2008 8:00:14 AM    chrisc321 Posts: 46 Joined: 9/20/2008 From: Las Vegas Status: offline Yep.. I would say battery as well (in reply to bigjohnstud4200) Post #: 5

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7116 doncollins 6248 tahoe sc 5874 rrasco 5572 pitsvtec 5323 d2vw14_20 5047 tk954rr 4684 vpsophmore 4663 blue fox 4570 havoc 4495

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology