question about FI light

Printable Version

CBR Forums >> General >> General Tech >> question about FI light

Page: [1]

Login Message << Older Topic   Newer Topic >>

question about FI light - 2/28/2006 8:37:13 PM    Amaese   Posts: 26 Joined: 2/21/2006 Status: offline On my 01' 929 RR the red malfunction light and FI light came on. At the same time, the bike began running very poorly, it idols at a lower RPM than usual and the sound is a little different. My mechanic diagnosed it as being the servo motor. We changed it out with another, yet problem still exists. Another mechanic said it was the O2 sensor, when I ordered a new one, he went to put it on and informed me my bike doesn't have one- only the calif. models have them. He then told me that it might be the TP sensor, but he's not about to find out if he's right because I pulled my bike out of there. Any suggestions on what to do would help- does only calif. models have O2 sensors? _____________________________ Andy Post #: 1

RE: question about FI light - 2/28/2006 8:57:32 PM    chex Posts: 48 Joined: 2/11/2006 From: panama city fl Status: offline mine did that last week ran kind of ruff and sounded like a v twin changed the plugs and it is fine now _____________________________ www.secondglancemc.com www.moto850.com (in reply to Amaese) Post #: 2

RE: question about FI light - 2/28/2006 9:08:37 PM    doncollins Posts: 6248 Joined: 7/21/2005 From: OH, KY & WV Status: offline The FI light is also known as the MIL malfunction indicator lamp. I'd hope who ever is/was working on it checked to see if you had a code. When you turn the key on, does the FI/MIL light flash? Count the long flashes as ten and the quick flashes as one and let me know what your code is. I'll look it up in your shop manual. Shop manual available (click here) Pages 5-12 and 5-13 are where the codes are. _____________________________ (in reply to Amaese) Post #: 3

RE: question about FI light - 3/1/2006 12:42:53 AM    Amaese   Posts: 26 Joined: 2/21/2006 Status: offline The code is 35. It points back at it being either servo motor or EGCV related. Thanks for the manual. _____________________________ Andy (in reply to doncollins) Post #: 4

RE: question about FI light - 3/1/2006 1:16:56 AM    insanearmer Posts: 67 Joined: 2/17/2006 From: vancouver, b.c. Status: offline tp sensor probably or if there is a sensor between the air filter to intake it would measure air flow or air mass _____________________________ 97cbr900rr w/ d&d full crome exhaust, polished frame, crome rims, steering damper, fender kit, K&N filter (in reply to Amaese) Post #: 5

RE: question about FI light - 3/1/2006 1:18:36 AM    insanearmer Posts: 67 Joined: 2/17/2006 From: vancouver, b.c. Status: offline nevermind didnt read the responses _____________________________ 97cbr900rr w/ d&d full crome exhaust, polished frame, crome rims, steering damper, fender kit, K&N filter (in reply to insanearmer) Post #: 6

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7116 doncollins 6248 tahoe sc 5874 rrasco 5572 pitsvtec 5323 d2vw14_20 5047 tk954rr 4684 vpsophmore 4664 blue fox 4570 havoc 4495

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology