1997 CBR 600 F3 in need of a few parts.

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

1997 CBR 600 F3 in need of a few parts.

Printable Version

CBR Forum >> Honda CBR Classifieds >> Private 'Wanted' Classifieds >> 1997 CBR 600 F3 in need of a few parts.

Page: [1]

Message

<< Older Topic Newer Topic >>

1997 CBR 600 F3 in need of a few parts. - 3/3/2006 1:39:55 AM

91taurisho

Posts: 41
Joined: 10/3/2005
Status: offline

I'm desperately in need of the following:

Main fairing stay bracket in decent shape.
Front headlight,
All fairings.<----- Preferably red in color
Radiator.
Driver right footpeg/rear brake lever assembly.

I think that's all for now. A close friend of mine laid this bike down while having a heart attack. He died on the way to the hospital. This was back in september. I purchased the bike from his family to restore it in his honor(it was one of his favorite things). Everything I listed is needed to finish the project. I just got the bike running after chasing down some electrical problems. I ended up replacing the entire wiring harness and a few sensors.

Thanks in advance!
Scott

_____________________________

Scott

1997 CBR 600 F3.
R.I.P. Nick

Post #: 1

RE: 1997 CBR 600 F3 in need of a few parts. - 3/4/2006 12:12:53 AM

91taurisho

Posts: 41
Joined: 10/3/2005
Status: offline

I also need a new guage cluster. I forgot about that one

_____________________________

Scott

1997 CBR 600 F3.
R.I.P. Nick

(in reply to 91taurisho)

Post #: 2

RE: 1997 CBR 600 F3 in need of a few parts. - 3/6/2006 4:28:32 AM

91taurisho

Posts: 41
Joined: 10/3/2005
Status: offline

I'm still in need of some of these parts. I might have a line on the stay bracket, radiator and the footpegs. But still, if you have them, let me know!

Thanks in advance,
Scott

_____________________________

Scott

1997 CBR 600 F3.
R.I.P. Nick

(in reply to 91taurisho)

Post #: 3

RE: 1997 CBR 600 F3 in need of a few parts. - 3/8/2006 6:34:31 PM

joranb

Posts: 41
Joined: 11/21/2005
Status: offline

quote:

ORIGINAL: 91taurisho

I'm desperately in need of the following:

Main fairing stay bracket in decent shape.
Front headlight,
All fairings.<----- Preferably red in color
Radiator.
Driver right footpeg/rear brake lever assembly.

I think that's all for now. A close friend of mine laid this bike down while having a heart attack. He died on the way to the hospital. This was back in september. I purchased the bike from his family to restore it in his honor(it was one of his favorite things). Everything I listed is needed to finish the project. I just got the bike running after chasing down some electrical problems. I ended up replacing the entire wiring harness and a few sensors.

Thanks in advance!
Scott

Hey Man,
I have the right foot peg that you need. However, I do not have the pin and spring that goes with it. Let me know if you would still be interested. Ill send you a pic if you are.

(in reply to 91taurisho)

Post #: 4

RE: 1997 CBR 600 F3 in need of a few parts. - 3/13/2006 7:42:27 PM

91taurisho

Posts: 41
Joined: 10/3/2005
Status: offline

I still need everything on the list except the stay bracket. '
I do need to clarify and say that I need the rear brake side heel plate as well as the peg/lever assembly. As well as the clutch lever.

and one more thing that I forgot. The rear brake light switch that goes on the right heel plate, is broken so
I need one of those too.

quote:

ORIGINAL: 91taurisho

I'm desperately in need of the following:

Main fairing stay bracket in decent shape.
Front headlight,
All fairings.<----- Preferably red in color
Radiator.
Driver right footpeg/rear brake lever assembly.

I think that's all for now. A close friend of mine laid this bike down while having a heart attack. He died on the way to the hospital. This was back in september. I purchased the bike from his family to restore it in his honor(it was one of his favorite things). Everything I listed is needed to finish the project. I just got the bike running after chasing down some electrical problems. I ended up replacing the entire wiring harness and a few sensors.

Thanks in advance!
Scott