RE: how to wheelie vid

Printable Version

CBR >> General >> Sights 'N Sounds >> RE: how to wheelie vid

Page: <<   < prev  1 2 [3]

Login Message << Older Topic   Newer Topic >>

RE: how to wheelie vid - 5/5/2006 9:30:05 PM    Riding Red   Posts: 59 Joined: 4/1/2006 Status: offline I haven't had alot of time to practice but I do having it coming up in first. Once you get it the first time it is pretty easy after that. But, when I try to slip the clutch in 2nd it seems to lurch forward pretty hard and not come up. That has me kind of sketched. Am I letting out to fast or not giving it enough throttle? My last question, is it possible to wheelie in 3rd on the 600? (in reply to infamous01) Post #: 31

RE: how to wheelie vid - 5/5/2006 9:48:10 PM    Turboedsupe   Posts: 289 Joined: 5/29/2005 Status: offline Your not giving it enough throttle and it sounds like your fully engaging the clutch and having it in to long. Just bring it up to speed and then pull the clutch in a little bit and pull the throttle to a lil over half and dump the clutch out. You have to do it fast though like as soon as you hit the gas drop the clutch dont let the rpms climb so high. I have not been able to get my f4i up in 3rd and i have a slip on intake and geared -1 +2, i have tried jumping and clutching at the same time but i only get it a foot off the ground. 2nd goes to 100 why do you need to pull it up in third? _____________________________ (in reply to Riding Red) Post #: 32

RE: how to wheelie vid - 5/5/2006 10:04:27 PM    Riding Red   Posts: 59 Joined: 4/1/2006 Status: offline I have been pulling the clutch in all of the way. How fast do you usually go in 2nd when you wheelie? Well, if you are in fourth and you want to wheelie, you shift down to 2nd? (in reply to Turboedsupe) Post #: 33

RE: how to wheelie vid - 5/6/2006 9:36:18 PM    Turboedsupe   Posts: 289 Joined: 5/29/2005 Status: offline Sitdowns or standups on regular roads i start at about 40 in 2nd and give about another 1/2 turn on the throttle from where the accelerating point was. My bike is geared-1 and +2 and it has a slip on and k&n. I cant do freeway wheelies though man i really dont see the point to but i can not get it up in third no matter what speed or how hard i jump or throttle it up. You can jump and clutch at the same time to pull it up at 70 in 2nd but i cant hit balance point fast enough yet to ride them that fast < Message edited by Turboedsupe -- 5/7/2006 3:02:22 PM > _____________________________ (in reply to Riding Red) Post #: 34

RE: how to wheelie vid - 5/7/2006 2:54:06 AM    isolated1523   Posts: 760 Joined: 11/7/2005 From: Richmond, KY Status: offline My 600RR would wheelie in 2nd or 3rd. Second gear at bout 70mph, then bounce it up. 3rd gear at 100 mph. More or less you need your RPM's to be between 8000 and 9000 on the 600RR if you're not clutchin it. I went -1/+2----now i bounce my seconds at ~38mph, and my thirds at 60mph. BIG difference lol. It'll come up in fourth, but you gotta be flyin to bounce it. -Adam _____________________________ Voodoochyl's Wisdom: "I would like to give you a "Dances with Wolves" Indian name...I dub thee "Snipes with a Fist". And Kewl's Indian name? "Two Dogs F_cking"." (in reply to Turboedsupe) Post #: 35

RE: how to wheelie vid - 5/8/2006 12:00:37 AM    Riding Red   Posts: 59 Joined: 4/1/2006 Status: offline I tried getting it up in second today at about 50, it wasn't happening. I have some practice to do. How long does it take to change the gearing? I want faster acceleration. My Uncle has an FZ 1 and he can kick my ass in the low end RPM's and get his bike up easier. (in reply to isolated1523) Post #: 36

RE: how to wheelie vid - 5/9/2006 10:10:28 AM    yohuallin   Posts: 26 Joined: 3/3/2006 Status: offline i have been trying with my 89 600, but i dont think it has enough power to do a power wheelie, i weight 150lb, tough i have done a wheelie once, slipping he clutch, but it scared the shit out me.... (in reply to Riding Red) Post #: 37

RE: how to wheelie vid - 5/9/2006 11:33:50 AM    Ruthless Posts: 579 Joined: 4/10/2006 Status: offline Slippin the clutch on a 600 is the way to go, take it slow watch your throttle control. If your only a 150 lbs you should be able to get the front end up from the roll on, try a little more throttle. (in reply to yohuallin) Post #: 38

RE: how to wheelie vid - 5/15/2006 10:15:38 PM    speed demon   Posts: 21 Joined: 5/13/2006 Status: offline on my 06 600 i run about 50 in second run to bout 55 or 60 then clutch it and roll into the gas u can ride second on out to bout 75 80 then shift to third then you'll be riden not much more need to shift again, but im not able to bring mine up in 3rd yet or atleast to the balance point _____________________________ you only get one ticket, might as well enjoy the ride... (in reply to Ruthless) Post #: 39

RE: how to wheelie vid - 5/15/2006 10:57:48 PM    AzNBoI_585SF   Posts: 196 Joined: 12/22/2004 Status: offline Honestly guys...I think that vids not so good...teaching power wheelies on a 600...there are just too many things they dont bring up. I DO however applaud then for stressing to take it easy and slow. For one they dont talk about using the rear brake...Ive seen a firm tap to the rear brake save a wheelie many times. They dont even talk about balance point...in my eyes the point of practicing wheelies is to reach BP and ride them. They dont talk about the HUGE difference between 600's and liter bikes. (in reply to speed demon) Post #: 40

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 6258 doncollins 6227 tahoe sc 5798 pitsvtec 5318 rrasco 4875 d2dgraphix_6 4673 blue fox 4300 vpsophmore 4189 havoc 4013 chainstretch 3984

New Vendors
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.