how do i install a fender eliminator

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

how do i install a fender eliminator

Printable Version

CBR >> General >> General Tech >> how do i install a fender eliminator

Page: [1]

Message

<< Older Topic Newer Topic >>

how do i install a fender eliminator - 3/7/2006 11:58:27 PM

pruchnicki44

Posts: 53
Joined: 3/7/2006
Status: offline

i recently purchased a fender eliminator kit for my 2006 cbr 600rr. i cannot wait to install but am not sure where to start. do i need to remove the rear seat what tools do i need. has anyone done this and kept stock exhaust how does it look.

Post #: 1

RE: how do i install a fender eliminator - 3/8/2006 12:07:19 AM

cbr04

Posts: 2185
Joined: 11/27/2005
Status: offline

what kind of fender kit did you get? just curious.

anyway it's pretty simple. you'll need to remove the seats and tail section. once that's off remove the stock fender. i've got the comp werkes kit and kept the stock exhaust. the tail section will feel like it's going to crack when you try to remove it. lots of people on here will tell you that

just take your time and it'll come off fine. that was the hardest part for me.

_____________________________

Southern Illinois > Atlanta, GA

(in reply to pruchnicki44)

Post #: 2

RE: how do i install a fender eliminator - 3/8/2006 12:14:22 AM

pruchnicki44

Posts: 53
Joined: 3/7/2006
Status: offline

i got the kit on ebay it was sent from a company called "fender eliminators" the problem is that i just purchased this bike and it is my first sportbike i don't know how to remove the seat and tail section, do i need any specific tools?

(in reply to cbr04)

Post #: 3

RE: how do i install a fender eliminator - 3/8/2006 12:33:13 AM

cjbettis

Posts: 1098
Joined: 10/29/2005
Status: offline

just metric wrenches/hex wrenches...

here is a link to download the service manual for your bike (or at least an 03-04 600RR)...all the things you will be doing are exactly the same on this year....haven't found one for 05-06 online yet

Service Manual

totally easy mod...YOU CAN DO IT

_____________________________

(in reply to pruchnicki44)

Post #: 4

RE: how do i install a fender eliminator - 3/8/2006 12:54:38 AM

pruchnicki44

Posts: 53
Joined: 3/7/2006
Status: offline

thanks, i'll see what i can do

(in reply to cjbettis)

Post #: 5

RE: how do i install a fender eliminator - 3/8/2006 8:51:07 AM

doncollins

Posts: 6248
Joined: 7/21/2005
From: OH, KY & WV
Status: offline

Post or PM if you run into problems, the tail is easy to take off, but you do have to pull the sides out a little to make it clear the frame. I'm installing my Competition Werks kit and Two Brothers slip on later today.

_____________________________