Turn signal relay replacement

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Turn signal relay replacement - advice please!

Printable Version

CBR Forum >> Current Honda CBR Models >> 1000 Modifications >> Turn signal relay replacement - advice please!

Page: [1]

Message

<< Older Topic Newer Topic >>

Turn signal relay replacement - advice please! - 3/15/2006 3:50:02 PM

rogfog

Posts: 40
Joined: 9/12/2005
Status: offline

I am just fitting Proton Flushmount front indicators to my Bike after already having fitted rear LEDs a while ago.

Now I am back to fast flashing again which i would rather not have. I have fitted resistors to the rear LEDs but this seems to make no difference to flash rate once the front LEDs are added.

Because there is not much room between fairing and bike and because the ceramic resistors do get hot I am a little loathe to fit them to the front as they will sit up against the inside of the middle fairing cowl and I am bothered about damage. The rear ones are mounted under the seat cowl well away from bodywork but there doesn't seem a "safe" place to fit the front resistors.

So I am looking to change the flasher unit relay and it couldn't be in a much more awkward place to get to right between the front lights.

Can anybody who has swapped out the relay give me any short cuts to changing it out or do I have to go through the whole upper cowl removal, front light removal etc. to do it as per the manual?

Also if I ever sell the bike and re-fit the stock indicators will I also have to change the relay back to the original or does the new relay work with both? Apologies for my electrical ignorance !!!!!

thanks for your help again.

Roger

Post #: 1

RE: Turn signal relay replacement - advice please! - 3/15/2006 5:07:03 PM

MgA_ODEN

2005 Ride Of
The Year
Posts: 2069
Joined: 4/19/2005
From: Spring , Tx
Status: offline

quote:

ORIGINAL: rogfog

Can anybody who has swapped out the relay give me any short cuts to changing it out or do I have to go through the whole upper cowl removal, front light removal etc. to do it as per the manual?

Yep , one big PITA , you can get rid of the ceramic resistors in the back you wont need them anymore.

quote:

ORIGINAL: rogfog

Also if I ever sell the bike and re-fit the stock indicators will I also have to change the relay back to the original or does the new relay work with both? Apologies for my electrical ignorance !!!!!

thanks for your help again.

Roger

The new relay works with both.

_____________________________

Black 2004 CBR1000RR

(in reply to rogfog)

Post #: 2

RE: Turn signal relay replacement - advice please! - 2/20/2007 4:26:12 PM

ajturner

Posts: 1
Joined: 2/14/2007
Status: offline

This may have already been answered, but, what relay do you use to replace the stock one?

(in reply to MgA_ODEN)

Post #: 3

RE: Turn signal relay replacement - advice please! - 3/3/2007 10:53:28 PM

madmachinist

Posts: 13
Joined: 7/23/2006
Status: offline

I think this is the one I used on my 06 1000rr. Works great!!

(in reply to ajturner)

Post #: 4

RE: Turn signal relay replacement - advice please! - 3/3/2007 10:55:04 PM

madmachinist

Posts: 13
Joined: 7/23/2006
Status: offline

OOPS!!!!
http://www.cyclegear.com/spgm.cfm?L1=2&L2=&L3=&L4=&item=MRX_FRH1_G
( I forgot to link it )

(in reply to madmachinist)

Post #: 5

RE: Turn signal relay replacement - advice please! - 3/4/2007 3:13:25 PM

bornluckee13

Posts: 277
Joined: 10/22/2006
From: AMERICA! F$&@ YEA!!
Status: offline

I'm running that relay on my 06 1krr with intergrated tail light and Hot Bodies flushmounts. works GREAT! that rapid fire blinking I was getting almost threw me into a seziure!!!!!!

_____________________________

Diversity is now our biggest fear.
My Mask Of Sanity Is Slipping Away.