Power Commander III USB for the 2006 CBR1000RR
Login  | |
|
|
|
|
|
RE: Power Commander III USB for the 2006 CBR1000RR - 3/26/2006 10:35:58 AM
|
|
|
fisherman
Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline
|
Asked the same question to local racers and local PC dealer. All say it doesn't work, but I'm sceptical considering the source of the info. Tried e-mail to PC themselves, no reply.
|
|
|
|
|
RE: Power Commander III USB for the 2006 CBR1000RR - 3/26/2006 11:17:55 AM
|
|
|
05Tribal
Posts: 919
Joined: 5/23/2005
Status: offline
|
The 04/05 will work on the 06. I found out on another forum. I have already installed it and the bike ran with out uploading the 06 stock exhaust map which is located on Dyno Jets site under News. I am about to walk out to my garage and upload the new map then ride to work.
_____________________________
2006 Red & Black CBR1000RR
Street Bike With a few mods
2007 White & Silver CBR600RR
For the wife
2005 CBR600RR
Totally for the track!
Columbus, OH
|
|
|
|
RE: Power Commander III USB for the 2006 CBR1000RR - 3/26/2006 2:39:14 PM
|
|
|
fisherman
Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline
|
Fantastic, just saved me a bundle.
|
|
|
|
|
RE: Power Commander III USB for the 2006 CBR1000RR - 3/27/2006 1:12:30 AM
|
|
|
05Tribal
Posts: 919
Joined: 5/23/2005
Status: offline
|
After loading the MAP I ran into a slight problem with calibrating the throttle. There are two ways to do it, one with the bike running and the other with the key in and on but the bike not running and using a 9v batter as the power source. The running method would not take but the 9v method did. Weird I know but all is good.
My question to anyone with PCIII's is do you use the Accelerator Pump feature? If so what settings on a 1000RR and can you tell a difference? If you want to know what AP feature is check out www.dynojet.com
_____________________________
2006 Red & Black CBR1000RR
Street Bike With a few mods
2007 White & Silver CBR600RR
For the wife
2005 CBR600RR
Totally for the track!
Columbus, OH
|
|
|
|
|
RE: Power Commander III USB for the 2006 CBR1000RR - 3/27/2006 2:20:24 AM
|
|
|
fisherman
Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline
|
I'm using the accelerator pump on my setup, don't notice it on the road but when opening throttle full on corner exits power comes on explosively. Initially it was difficult keeping the front wheel down but after playing around I've got it spot on. Will let you know the settings when I get home 2night. I ride in Johannesburg South Africa which is at 1600m above sea level so our bikes / cars always feel flat, I definately have a edge out of corners even against V-Twins.
_____________________________
CBR 1000 RR '06
Full Arata Ti with matt black can
Arata rear set
DNA filters
PC III USB
Renthal 42 r & 14 f
Regina x link gold chain
Speedohealer
Acumen gear indicator
Fren Tubo stainless braded brake hoses
Garmin Nuvi 300
|
|
|
|
|
RE: Power Commander III USB for the 2006 CBR1000RR - 3/27/2006 3:20:40 PM
|
|
|
fisherman
Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline
|
AC pump settings - 80% sens, 30% fuel, 20 revs
_____________________________
CBR 1000 RR '06
Full Arata Ti with matt black can
Arata rear set
DNA filters
PC III USB
Renthal 42 r & 14 f
Regina x link gold chain
Speedohealer
Acumen gear indicator
Fren Tubo stainless braded brake hoses
Garmin Nuvi 300
|
|
|
|
|
Printable Version
