bat not getting a charge. click here

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

bat not getting a charge. click here

Printable Version

CBR Forums >> Past CBR Models >> CBR 600F3 >> bat not getting a charge. click here

Page: [1]

Message

<< Older Topic Newer Topic >>

bat not getting a charge. click here - 3/28/2006 6:07:37 PM

rangerbrown

Posts: 81
Joined: 3/25/2006
Status: offline

well i got the call today about the bike, the retard that put the stator in didn't secure the bolt and it came out.

well as you maw have guessed, the stator, and the flywheel are shot. what are my options and what can i do?

the Honda shop says that "he would look on ebay" or call a list of salvage shops. which i have done now.

but here is the question i pose to you all, can/will an f2 stator and flywheel work on m f3?
and also the temp sensor in the block is bad, (the one that runs the temp gauge, will the one from the f2 work with f3.

how ever despite all this the Honda shop says that the engine is in great shape and i shouldn't have any problems what so ever when i replace these parts. good to hear

i did for shit And giggles ask what the fixed price was going to be, it was 1600$. before he told me he asked "are you siting down" lol

how ever, the rep there is/and has been very helpful, and because of that i will continue my business with Honda

_____________________________

1995 cbr f3 got for 1000$
2004 suk gs500f first bike 12000 miles

Post #: 1

RE: bat not getting a charge. click here - 3/28/2006 8:42:25 PM

transamlt1man

Posts: 796
Joined: 9/4/2005
Status: offline

Yes a F2 stator and flywheel will fit a F3. I checked the part numbers and they are the same. As for the temp sensor I am not sure.

(in reply to rangerbrown)

Post #: 2

RE: bat not getting a charge. click here - 3/28/2006 9:30:52 PM

rangerbrown

Posts: 81
Joined: 3/25/2006
Status: offline

sweeet man i think you ever so much. the dealer said jsut to oder them new would be about 900$, here's another question for you, he said dont mix match them (like brands) is this true or can they be mis matched?

(in reply to transamlt1man)

Post #: 3

RE: bat not getting a charge. click here - 3/29/2006 11:53:23 PM

CBR600F2

Posts: 29
Joined: 3/18/2006
Status: offline

$1,600 to fix it?? NUTS!!

I'd get the bike out of there, buy the stuff off of this Board or Ebay
and fix it yourself for less than $150.

You will need to acquire a flywheel puller & service manual. It's a VERY EASY job.

(in reply to rangerbrown)

Post #: 4

RE: bat not getting a charge. click here - 3/30/2006 8:33:19 AM

rangerbrown

Posts: 81
Joined: 3/25/2006
Status: offline

done and done, go tthe manual on the pc and i have the parts on the way. i (should) have it runing by next week end. told the shop to at least have it were i can ride it. i was told they would leave the stator out. that way it can run no problem but it just wont charge. will make for a lot less pushing

(in reply to CBR600F2)

Post #: 5