Yoshi RS-5 and Power Commander

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Yoshi RS-5 and Power Commander

Printable Version

CBR >> Current Honda CBR Models >> 600 Modifications >> Yoshi RS-5 and Power Commander

Page: [1]

Message

<< Older Topic Newer Topic >>

Yoshi RS-5 and Power Commander - 3/29/2006 10:08:40 AM

cb1974

Posts: 96
Joined: 3/7/2006
Status: offline

Hi All,

Does anyone know where i can get a map for the Yoshi RS-5 Slipon for a 06 CBR600RR

Thanks!

CB

Post #: 1

RE: Yoshi RS-5 and Power Commander - 3/29/2006 11:14:25 AM

patas75

Posts: 140
Joined: 10/23/2005
From: Monrovia, CA
Status: offline

yep, you can go to your nearest dyno shop and get a custom one done. i have an rs-5 as well and can't find one. i am using the jardine map and it works fine. i do want to take it in and get a custom map done. good luck on your hunt.

_____________________________

Sorry officer, I didn't know you meant for me to pull over.
=================================
2005 CBR600RR Black
Yoshimura RS - 5 Slip On
PCIII USB
Competition Werkes Fender Eliminator
And the work continues. . .

(in reply to cb1974)

Post #: 2

RE: Yoshi RS-5 and Power Commander - 3/29/2006 11:47:17 AM

cb1974

Posts: 96
Joined: 3/7/2006
Status: offline

How much does having the custom map done usually cost? By the way, how do you like the RS-5?

Thanks!

CB

(in reply to cb1974)

Post #: 3

RE: Yoshi RS-5 and Power Commander - 3/30/2006 8:21:12 PM

patas75

Posts: 140
Joined: 10/23/2005
From: Monrovia, CA
Status: offline

The shop by where I live charges around $200 to have a custom dyno map. From what I've seen online that's pretty much what you are going to pay, maybe more. I love the RS-5. It has a nice growl yet not excessive. Definitely kicks in in the midrange.

_____________________________

Sorry officer, I didn't know you meant for me to pull over.
=================================
2005 CBR600RR Black
Yoshimura RS - 5 Slip On
PCIII USB
Competition Werkes Fender Eliminator
And the work continues. . .

(in reply to cb1974)

Post #: 4

RE: Yoshi RS-5 and Power Commander - 3/31/2006 6:12:17 AM

doncollins

Posts: 6230
Joined: 7/21/2005
From: OH, KY & WV
Status: offline

Shops around here want 300+ to tune for a PC III. But IMO, not needed. After countless hours of researching... some of the manufactures will admit that their slip-on doesn't do anything different performance wise than brand X. If a slip on has a 2 1/4 straight through pipe... most do, and then they will perform the same. Length does play a part in this, but they're all close to the same in that area also. That is why DynoJet only has one map available for slip ons... they don't need to waste time or money. You can find some of this in DynoJet's FAQ pages. They state that the maps they list will put in the 90% to 95% optimal performance for your equipment... is the other 5% to 10% worth $300? That's a nice new set of rubber, helmet, jacket or something else you can use. See my point.

_____________________________

(in reply to patas75)

Post #: 5

RE: Yoshi RS-5 and Power Commander - 3/31/2006 2:49:59 PM

steve00ses

Posts: 425
Joined: 1/31/2006
Status: offline

now don thats only for slipon on right..not full?

_____________________________

2006 cbr600RR orange with black tribal.
Yoshimura Full Titanium Rs5
Power Commander III
K&n air filter, Engine Ice
Watson Design Front LED Blinkers
Rear Fender Eliminator Kit, by 1tail
Vortex Framesliders
Orange rimtape,
HID 6000k, MOD-Ex

(in reply to doncollins)

Post #: 6