F2 POWER BY 900RR

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

F2 POWER BY 900RR

Printable Version

CBR >> Past CBR Models >> CBR 600F2 >> F2 POWER BY 900RR

Page: [1]

Message

<< Older Topic Newer Topic >>

F2 POWER BY 900RR - 4/6/2006 11:24:47 AM

Nipz

Posts: 215
Joined: 10/22/2004
Status: offline

here is a link to the forum. I started it in 900RR.

http://www.cbrforum.com/m_83850/tm.htm

_____________________________

~~~~~~~~~~~~~~~~~
1993 CBR600F2 (sold)

1991 CBR600F2 893cc AKA F9

Post #: 1

RE: F2 POWER BY 900RR - 4/6/2006 1:55:47 PM

rangerracer

Posts: 25
Joined: 10/17/2005
Status: offline

what year motor did he use?a friend of mine has a wrecked cb919 that we are thinking about doing this swap with.any info would be great

(in reply to Nipz)

Post #: 2

RE: F2 POWER BY 900RR - 4/7/2006 4:05:52 AM

Nipz

Posts: 215
Joined: 10/22/2004
Status: offline

they use a 93-95 893cc CBR900RR motor. not sure how the cb919 is but had to make engen mounts and a fuel pump because the carbs are higher then the bottem of the gas tank. they guy that set mine up is a pro welder so he did it all.

_____________________________

~~~~~~~~~~~~~~~~~
1993 CBR600F2 (sold)

1991 CBR600F2 893cc AKA F9

(in reply to rangerracer)

Post #: 3

RE: F2 POWER BY 900RR - 4/7/2006 2:25:35 PM

rangerracer

Posts: 25
Joined: 10/17/2005
Status: offline

the welding part is not a problem.it is what i do for a living.well he wants to much for his motor so i guess i will be hitting ebay for one.thanks for the info

(in reply to Nipz)

Post #: 4

RE: F2 POWER BY 900RR - 4/8/2006 5:53:12 AM

Nipz

Posts: 215
Joined: 10/22/2004
Status: offline

you have any other question just ask. if i see them i will give you some info or what i know.

_____________________________

~~~~~~~~~~~~~~~~~
1993 CBR600F2 (sold)

1991 CBR600F2 893cc AKA F9

(in reply to rangerracer)

Post #: 5

RE: F2 POWER BY 900RR - 4/8/2006 10:38:13 PM

rafo!

Posts: 42
Joined: 4/8/2006
From: altamonte springs, fl
Status: offline

which carbs did u use for the motor...............

(in reply to Nipz)

Post #: 6

RE: F2 POWER BY 900RR - 4/13/2006 12:22:48 PM

Nipz

Posts: 215
Joined: 10/22/2004
Status: offline

stock ones off the 893. the motor is all stock but a slip on.

The only problem it has is no room for a rad fan. i have a little area i can put on is like 6inch square. Any Ideas?

_____________________________

~~~~~~~~~~~~~~~~~
1993 CBR600F2 (sold)

1991 CBR600F2 893cc AKA F9

(in reply to rafo!)

Post #: 7

RE: F2 POWER BY 900RR - 4/25/2006 5:35:02 AM

MT Wallet

Posts: 1002
Joined: 4/22/2006
Status: offline

the ultimate sleeper!

(in reply to Nipz)

Post #: 8