Clutch Master went empty
Login | |
|
Clutch Master went empty - 4/6/2006 8:37:45 PM
|
|
|
Hotswap
Posts: 28
Joined: 3/28/2006 From: Deltona, Fl Status: offline
|
I noticed today that it was getting hard to shift. Now I have only had it for a couple days, so I thought it was just me. Well low and behold I’m on the way back to work from lunch and, I take off in first and it wont shift to second... wont shift to neutral..etc. Luckily I made it back to work with no stops :) When I got back I put it on the center stand and that was when I realized the clutch master was empty, there was no tension on the clutch lever. Added more fluid, pulled the faring and bled it down and now it is better than new. My only concern is that I never had a puddle on the floor. I do have some residue on the lower driver side fairing and it wrinkled the paint in a small area. But the bleeder was snug, and dry. The casing was clean except for the bottom rear mounting bolt. The casing where the face mounting bold goes through has the paint wrinkled off also. This is just below where the clutch hose connects. I loosened and re-snugged the clutch hose bolt and it looks good. But is there anything else I need to be on the watch for? Thanks for any info
|
|
|
|
|
|
Contact Us |
Advertising |
Automotive Directory |
About Us |
Archive |
Honda CBR Motorcycle Links |
Legal |
Privacy Policy |
© CBR Forum
CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.
|