CBR900RR

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

CBR900RR

Printable Version

CBR >> Honda CBR Classifieds >> PRIVATE For Sale / Trade Classifieds >> CBR900RR

Page: [1] 2 3 next > >>

Message

<< Older Topic Newer Topic >>

CBR900RR - 4/7/2006 1:37:56 PM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

I've got a ton of CBR900RR parts that I'm selling, basically the whole bike except the seats, upper fairing, frame, tail-light and exhaust.

The upper fairing, tank and tail have some damage (fairings are cracked and tank is dented). The bike show 27,000 miles but it was heavily geared and you know how that goes. The engine runs fine but I have to keep the choke out to keep it running or give it gas to I'm sure the carbs. could use a rebuild. Tranny shifts through all gears and I rode it down the street in every gear. Headlight works....hmmmmm, not sure if there is anything else. When the bike went down it had frame sliders.

The side fairings are in good shape as well as the under fairing. Radiator doesn't leak, brakes work great, forks are good, swingamr is good, subframe is good.

Basically if you need it ask. I don't want to post pictures of everything because it will flood my photobucket but if you want something post up and I'll post a picutre of it. The engine is still in the bike because I want to leave it there to show that it runs to whoever is interested. (I'll start it over the phone or take a video of it).

Josh

Post #: 1

RE: CBR900RR - 4/8/2006 12:28:32 AM

rangerracer

Posts: 25
Joined: 10/17/2005
Status: offline

what are you asking for the motor?please let me know asap

(in reply to foresteronw)

Post #: 2

RE: CBR900RR - 4/8/2006 12:34:57 AM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

Do you want the complete engine with the head or just the lower end? Do you also want the carbs? Where r u located?

(in reply to rangerracer)

Post #: 3

RE: CBR900RR - 4/8/2006 10:46:38 AM

rangerracer

Posts: 25
Joined: 10/17/2005
Status: offline

i want the whole thing except the cabs,radiator,.i am in nebraska 68434

(in reply to foresteronw)

Post #: 4

RE: CBR900RR - 4/8/2006 1:39:21 PM

Err

Posts: 824
Joined: 4/8/2006
Status: offline

parts i need if you have any of them are tail light, front master resevoir cup w/ the hose, stock can.

< Message edited by Err -- 4/8/2006 1:40:06 PM >

(in reply to rangerracer)

Post #: 5

RE: CBR900RR - 4/8/2006 2:21:55 PM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

I'm asking $800 for the engine with out the carbs or anything else. Still in the bike so you can hear it run. The shipping is going to be $150.00 to $200.00 though. Let me know either way though, as of right now you have first dibs.

< Message edited by foresteronw -- 4/8/2006 2:25:43 PM >

(in reply to rangerracer)

Post #: 6

RE: CBR900RR - 4/8/2006 2:33:53 PM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

quote:

ORIGINAL: Err

parts i need if you have any of them are tail light, front master resevoir cup w/ the hose, stock can.

I have the tail light in mint shape on ebay right now. If you want it I can still end the auction since it was just put on there and nobody has bid on it. I have the front master resevoir cup and all the brake lines (which hose are you talking about, the actual brake line itself?). I don't have a stock can but I do have a two brother's slip-on on ebay as well. Again I don't have any bids on it and can end the auction. Once there is a bid placed on either of those though I won't be able to do anything.

For the tail light and brake cup/hose it would be $65+ shipping
Add the can for $135.00 +shipping.

Josh

(in reply to Err)

Post #: 7

RE: CBR900RR - 4/8/2006 2:41:11 PM

greerstyl

Posts: 109
Joined: 9/27/2005
Status: offline

how much for:

full tail plastics minus light?

left and right side fairing upper and lower?

(in reply to foresteronw)

Post #: 8

RE: CBR900RR - 4/8/2006 4:01:51 PM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

quote:

ORIGINAL: greerstyl

how much for:

full tail plastics minus light?

left and right side fairing upper and lower?

Tail plastics $75+shipping (they do have a crack in one side though)
Side fairings $100+shipping (these are in good shape with holes for frames sliders already cut out.
Upper fairing $40.00 plus shipping, it is cracked.

$200.00 for everything plus shipping.
I'll post pictures in a couple hours of as much of it as I can.

(in reply to greerstyl)

Post #: 9

RE: CBR900RR - 4/8/2006 5:42:48 PM

Err

Posts: 824
Joined: 4/8/2006
Status: offline

foresteronw-i need the cup and the hose that goes into the master. how much for the whole front brake assembly (i don't need the lines that go to the caliper, just everything that mounts to the clipon)? this way i don't have worry about getting the right part.

(in reply to foresteronw)

Post #: 10

RE: CBR900RR - 4/8/2006 7:12:39 PM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

quote:

ORIGINAL: Err

foresteronw-i need the cup and the hose that goes into the master. how much for the whole front brake assembly (i don't need the lines that go to the caliper, just everything that mounts to the clipon)? this way i don't have worry about getting the right part.

shipped for $50.00 including the lever.

(in reply to Err)

Post #: 11

RE: CBR900RR - 4/8/2006 8:20:59 PM

Err

Posts: 824
Joined: 4/8/2006
Status: offline

ok i'll take it. what method payment? paypal?

(in reply to foresteronw)

Post #: 12

RE: CBR900RR - 4/10/2006 12:06:04 PM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

O.k., here are some pictures of what I have, sorry it took a while.

Upper fairing, like I said it's cracked and has a piece missing but I'll list it anyway you never know. Does not come with the headlight, turn signals or under panels (the black things) $30

http://img.photobucket.com/albums/v177/busa413/Picture870.jpg
http://img.photobucket.com/albums/v177/busa413/Picture871.jpg
http://img.photobucket.com/albums/v177/busa413/Picture872.jpg

headlight assembly- in great shape with
http://img.photobucket.com/albums/v177/busa413/Picture873.jpg
http://img.photobucket.com/albums/v177/busa413/Picture874.jpg

Gas tank- has a orange sized dent on the left side of the tank. Black mark is where a sticky tank protector was taken off. $70
http://img.photobucket.com/albums/v177/busa413/Picture878.jpg
http://img.photobucket.com/albums/v177/busa413/Picture877.jpg

Side panels- Side panels are already drilled for frame sliders and in great shape. Inner panels (the black ones) are in great shape $50.00 for each side panel $25.00 for each inner panel, $10 for each fairing attach cover (the black pieces that go on the left and right side of the fairings).
http://img.photobucket.com/albums/v177/busa413/Picture879.jpg
http://img.photobucket.com/albums/v177/busa413/Picture880.jpg
http://img.photobucket.com/albums/v177/busa413/Picture881.jpg
http://img.photobucket.com/albums/v177/busa413/Picture882.jpg
http://img.photobucket.com/albums/v177/busa413/Picture883.jpg
http://img.photobucket.com/albums/v177/busa413/Picture884.jpg
http://img.photobucket.com/albums/v177/busa413/Picture885.jpg

Right hand passenger foot peg assembly. Great shape $35.00
http://img.photobucket.com/albums/v177/busa413/Picture886.jpg

Left hand passenger foot peg assembly. Good shape has small scrape on underside of peg that you can only see when peg is up and only if you are looking for it.
$30.00
http://img.photobucket.com/albums/v177/busa413/Picture888.jpg

Subframe- Great shape, I'll leave the black plastic "trunk" thing on there if the buyer wants it. $100.00
http://img.photobucket.com/albums/v177/busa413/Picture889.jpg

Airbox-great shape filters are still in it. $40
http://img.photobucket.com/albums/v177/busa413/Picture891.jpg

Carbuerators- great shape, ran fine on the bike, could use to be cleaned up. $100
http://img.photobucket.com/albums/v177/busa413/Picture892.jpg

Radiator- Great shape, no rust when I drained it out. $60
http://img.photobucket.com/albums/v177/busa413/Picture894.jpg

Front and Rear brake calipers- Great shape, worked great when I rode it just took them off yesterday. I have the stock lines if the buyer wants them as well, EBC pads in calipers still have a ton of meat on them as well. $75
http://img.photobucket.com/albums/v177/busa413/Picture896.jpg

Front Forks- Good shape, straigt and work great. $275
http://img.photobucket.com/albums/v177/busa413/Picture897.jpg
http://img.photobucket.com/albums/v177/busa413/Picture890.jpg

Front and rear wheel- Great shape as far as dings, bends and dents. They have normal road debris wear like a small scratch here and there. Rims have D207's on them and the front looks almost brand new as far as tread wear and the rear is about 70%. Front wheel is still on the bike and does not come with the rotors but will have the brearings still installed. Rear wheel is off the bike (as seen in the picture and comes with the wheel and tire only). $175 for the set of $100 each.
http://img.photobucket.com/albums/v177/busa413/Picture890.jpg
http://img.photobucket.com/albums/v177/busa413/Picture869.jpg

Engine- Runs great, if it was me I'd run a tune up on it. Pulled the oil yesterday split the oil filter in hald and had no debris/rust/water. Like I said I rode the bike and it ran strong. Transmission shiftes nice no problems. $800.00
http://img.photobucket.com/albums/v177/busa413/Picture893.jp

< Message edited by foresteronw -- 4/17/2006 2:51:54 PM >

(in reply to Err)

Post #: 13

RE: CBR900RR - 4/11/2006 11:26:19 PM

greerstyl

Posts: 109
Joined: 9/27/2005
Status: offline

pm sent for upper, sides, and tail

(in reply to foresteronw)

Post #: 14

RE: CBR900RR - 4/14/2006 12:34:06 AM

foresteronw

Posts: 39
Joined: 4/7/2006
Status: offline

Couple more items. I have a Two Brothers Slip-on exhaust. According to their website it should fit 1996-1999. It's the Aluminum C2 modle, three bolt flange slip-on. Needs to be cleaned up but it's in good shape. $125 plus shipping

Rear tail light in great shape, $35 plus shipping.

(in reply to greerstyl)

Post #: 15