sprocket size : dyno run(hp)

Printable Version

CBR >> Current Honda CBR Models >> CBR 1000RR >> sprocket size : dyno run(hp)

Page: [1]

Login Message << Older Topic   Newer Topic >>

sprocket size : dyno run(hp) - 4/20/2006 1:04:22 AM    blade17fire Posts: 353 Joined: 4/19/2006 Status: offline hi guys.. will a bigger or smaller sprocket size front or rear have an effect on the HP shown on the Dyno run?? thx in advance!! _____________________________ GPR Thunderline Exhaust BMC air filter Hodaka V stacks Flapper mod PC III AFAM Sprockets HID Headlights HRC Clutch Springs HRC Cam Sprockets HRC Engine Power Up Kit III HRC 1/6 Turn Throttle Ported and Polished Cylinder Head Post #: 1

RE: sprocket size : dyno run(hp) - 4/20/2006 7:18:15 AM    Anubis Posts: 2159 Joined: 6/27/2005 Status: offline Yeah it will effect the HP shown, but if you tell them what sizes you have on, they can calculate the actual figure from the stock no of teath. _____________________________ Liverpool-UK Bla Bla Bla - Just Ride It !! (in reply to blade17fire) Post #: 2

RE: sprocket size : dyno run(hp) - 4/21/2006 3:21:56 AM    blade17fire Posts: 353 Joined: 4/19/2006 Status: offline so lets say i have a size 45 at the rear(sounds crazy but i likeeee!!) and stock on the front. will the dyno give out a higher reading or lower?? _____________________________ GPR Thunderline Exhaust BMC air filter Hodaka V stacks Flapper mod PC III AFAM Sprockets HID Headlights HRC Clutch Springs HRC Cam Sprockets HRC Engine Power Up Kit III HRC 1/6 Turn Throttle Ported and Polished Cylinder Head (in reply to Anubis) Post #: 3

RE: sprocket size : dyno run(hp) - 4/22/2006 8:06:38 AM    Anubis Posts: 2159 Joined: 6/27/2005 Status: offline If you did that you`d run a higher reading than it actually has, if uncorrected figures are shown. The 45 rear will be good, I use a 46 rear on track and 42 for the street. _____________________________ Liverpool-UK Bla Bla Bla - Just Ride It !! (in reply to blade17fire) Post #: 4

RE: sprocket size : dyno run(hp) - 4/24/2006 11:54:02 AM    geepaks   Posts: 57 Joined: 9/7/2005 Status: offline I also run a 42 on the street - very happy with it. _____________________________ 2005 Repsol (in reply to Anubis) Post #: 5

RE: sprocket size : dyno run(hp) - 4/26/2006 1:14:26 AM    blade17fire Posts: 353 Joined: 4/19/2006 Status: offline anubis..u got a size 46t for the rear?? i am runnin on AFAM and they got up to size 45t only..It is quick on the track thou(Sepang Int Circuit) and i likeeee!! on the street, it is too revvy.. Gearing up to go to Thailand tonite..wish me a safe journey guys!! _____________________________ GPR Thunderline Exhaust BMC air filter Hodaka V stacks Flapper mod PC III AFAM Sprockets HID Headlights HRC Clutch Springs HRC Cam Sprockets HRC Engine Power Up Kit III HRC 1/6 Turn Throttle Ported and Polished Cylinder Head (in reply to geepaks) Post #: 6

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7118 doncollins 6248 tahoe sc 5874 rrasco 5573 pitsvtec 5323 d2vw14_20 5048 tk954rr 4687 vpsophmore 4664 blue fox 4570 havoc 4495

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology