RE: undertail question.

Printable Version

CBR >> Past CBR Models >> CBR 600F4 >> RE: undertail question.

Page: <<   < prev  1 [2] 3 4   next >   >>

Login Message << Older Topic   Newer Topic >>

RE: undertail question. - 6/21/2006 4:54:43 AM    otisdr Posts: 113 Joined: 4/10/2006 Status: offline I had my done by a pro , took him about 2 hours and yeah a bunch of cutting but I like my bike too much to have "tried it" on my own yes the keyhole is relocated and you don't lose too much space in the tail section but as with any undertail (aftermarket) you will lose a bit but I still have my gloves, insurance paperwork, and a u-lock. all mounted in there just fine, so it'll still hold what you need. Good luck and enjoy, MOTOTECK! FOREVER~! _____________________________ 3rd Gear wheelies (NO CLUTCH) (in reply to spleen04) Post #: 16

RE: undertail question. - 6/21/2006 4:55:11 AM    otisdr Posts: 113 Joined: 4/10/2006 Status: offline I had my done by a pro , took him about 2 hours and yeah a bunch of cutting but I like my bike too much to have "tried it" on my own yes the keyhole is relocated and you don't lose too much space in the tail section but as with any undertail (aftermarket) you will lose a bit but I still have my gloves, insurance paperwork, and a u-lock. all mounted in there just fine, so it'll still hold what you need. Good luck and enjoy, MOTOTECK! FOREVER~! _____________________________ 3rd Gear wheelies (NO CLUTCH) (in reply to burner) Post #: 17

RE: undertail question. - 6/21/2006 4:57:56 AM    otisdr Posts: 113 Joined: 4/10/2006 Status: offline Looks good man, you are bolder than me, I had the pros do my mototeck undertail, took him a couple hours but he was also my buddy so we drank the whole time, :) _____________________________ 3rd Gear wheelies (NO CLUTCH) (in reply to jnjtrukin) Post #: 18

RE: undertail question. - 6/22/2006 11:04:29 AM    jnjtrukin Posts: 105 Joined: 6/7/2006 Status: offline Thanks,I got the LED's on my pegs the other night, I'll get a pic here soon and post that, it helped my brake lights show up a lot better after the conversion. My lock is right above my license plate, and I didn't loose a whole lot of space, but there was a lot of cutting to the fender, more than I though for sure since I had to put it on a take it off about 10 times to cut more, haha Jason (in reply to stinz05) Post #: 19

RE: undertail question. - 6/28/2006 7:59:15 PM    Hypnotized   Posts: 18 Joined: 6/7/2006 Status: offline I just ordered that Mototeck undertail. I hope to get it this weekend so I can install it. Not looking forward to the cutting though. (in reply to jnjtrukin) Post #: 20

RE: undertail question. - 6/30/2006 9:02:13 AM    jnjtrukin Posts: 105 Joined: 6/7/2006 Status: offline Here's mine with the LED's I drilled into the pegs also... Jason Thumbnail Image Attachment (1) (in reply to Hypnotized) Post #: 21

RE: undertail question. - 7/5/2006 3:55:25 AM    burner   Posts: 60 Joined: 6/20/2006 Status: offline hey jason wow that looks real good which kit is that one? the one off ebay?? that looks reall good esp at night i really like it do you have any pics of it during the day too? thanks! (in reply to jnjtrukin) Post #: 22

RE: undertail question. - 7/9/2006 3:49:01 PM    burner   Posts: 60 Joined: 6/20/2006 Status: offline YA IT does look like the mototeck is the beter one to go with.. the overall design and apperance of it is better but ya it is much pricier!!!!!! Quick question does anyone who has it know i assume the 2 lights under the running lights are the signals? (in reply to burner) Post #: 23

RE: undertail question. - 7/9/2006 7:46:26 PM    jnjtrukin Posts: 105 Joined: 6/7/2006 Status: offline Thanks, Yeah that's the one off ebay... I don't have any daytime pics of the undertail but I can take some this week... Jason (in reply to burner) Post #: 24

RE: undertail question. - 7/14/2006 2:49:55 PM    jnjtrukin Posts: 105 Joined: 6/7/2006 Status: offline here's a daytime pic that was asked for... Jason Thumbnail Image Attachment (1) (in reply to jnjtrukin) Post #: 25

RE: undertail question. - 7/21/2006 2:16:47 AM    burner   Posts: 60 Joined: 6/20/2006 Status: offline thanks jason looks good (in reply to jnjtrukin) Post #: 26

RE: undertail question. - 7/22/2006 4:07:15 PM    Shaken   Posts: 88 Joined: 3/30/2006 Status: offline here is a pic of mine i got it off ebay for $60 can painted also very well made and very strong (in reply to burner) Post #: 27

RE: undertail question. - 7/23/2006 10:57:13 PM    burner   Posts: 60 Joined: 6/20/2006 Status: offline hey shaken that looks real nice too man that kit u can keep your original tail light right?? i see you changed your light is that one LED light?? i assume integrated turn signals cause i dont see any other lights? i got a quick question for you did you install that kit?? is it like the mototeck one or the other ebay undertail with the integrated running lights where you have to cut a lot of the bike in order to instalL?? i'd rather not cut my bike too much if this one is a straight bolt on i'd rather go for this one and its cheaper.. and i like the look of it too its real clean lemme know thanks man (in reply to Shaken) Post #: 28

RE: undertail question. - 7/25/2006 2:15:41 AM    Shaken   Posts: 88 Joined: 3/30/2006 Status: offline this was a pefect fit the only thing i had to do was drill a few holes and cut 2 bolts. the 2 bolts that hold the passenger peg on. or in my case the exhaust hanger. they were to long and the undertail would`nt fit in. took me a while to figure it out but once i removed the bolt the undertail went right in. if you do buy this undertail shoot me a email and i will give directions to install it. just to make your life easyer because it dosent come with directions. there are a few tricks to getting it in. here is my email coprfire AT hotmail and ya its the clear alternative integrated tail. i love it. < Message edited by Shaken -- 7/30/2006 10:54:29 AM > (in reply to burner) Post #: 29

RE: undertail question. - 7/27/2006 3:28:27 AM    burner   Posts: 60 Joined: 6/20/2006 Status: offline Hey shaken! I didnt realize what you mean when you put 60 $ can i only notice afte ri look at your plate again ontario plates where u from? i'm from toronto u around the area?? i live in north york anyways ya man that kit looks real good a LOT ChEAPER than 300$ for the mototeck one... how is the quality of it?? And i also really like how you dont have to cut or modify the bike that much a lot of people saying you have to do a lot of cutting into the trunk and what not... i dont really like to cut so much stuff off my bike so u said u got it of ebay was it 60$ cdn shipped?? (in reply to Shaken) Post #: 30

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 6230 doncollins 6225 tahoe sc 5797 pitsvtec 5316 rrasco 4874 d2dgraphix_6 4673 blue fox 4273 vpsophmore 4178 havoc 4006 chainstretch 3940

New Vendors
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.