|
jnjtrukin -> RE: undertail question. (6/19/2006 3:10:34 PM)
|
I just installed the one on here posted off of Ebay on my 99 red f4. took about 3-4 hours, you have to cut the crap out of the black fender, a dremel tool would be ideal, but I only had a hacksaw and a set of tin snips at my girlfriends house, so I made due. I also had to do some pretty good sanding on the rear edges of it as it was just a bit oversized, but I didn't mind that much because now it is a tight custom fit. The color is close but it doesn't match exactly. I love the look of it on the bike, the most disappointing part about it is the difference between the running tail light and the brake light isn't very obvious, so I've heard it's hard to tell if I'm braking so I'm adding a set of 3 leds in the back of my passenger pegs that will only light when I hit the brakes to grab some attention. Here's a pic of it at this point, I'm adding the LED's tonight Jason [image]local://upfiles/8277/8619EB2B42EC4A83A767010B995D1EC2.jpg[/image]
|
|
|
|